使用TC0C与FP00中断测量温度,----获得成功!数码管在主程序显示,没有抖动!2 个端口独立上下限控制输出.芯片: SN8P1602B-SOP18脚,电容器104,传感器50K,标准电阻4K7.50格分度

两路控制说明：均为:温度＜下限值控制=高电平.温度≥上限值控制=低电平.两路控制各使用自己的上下限来控制.设置上下限分别闪烁显示0H,0L,1H,1L.这是一个很成功的温控程序,仅仅1K空间做出来 4 个上下限值的控制.

校验和:1E09,使用空间908剩余空间115 47K+4.7K+104 配置.50KET传感器,FP00测量

2 路上下限控制.-FP00 interrupted TC0C with the use of temperature measuring success ,----! Digital tube display in the main program, there is no jitter! Two independent upper and lower limits of the port control output. Chipset: SN8P1602B-SOP18-pin, capacitor 104, the sensor 50K, Standard Resistor 4K7 .50 degree grid control two-way Descr iption: are: temperature < the lower limit control = high. ≥ upper limit of temperature control = low. two-way control the use of their own to control the upper and lower limits. scintillation set upper and lower limits, respectively, Showing 0H, 0L, 1H, 1L. This is a very successful program of temperature control, 1K only four out of space in upper and lower control limits. checksum: 1E09, the use of space 908 space 115 47K+4.7 K+104 .50 KET sensor configuration, FP00 measurement　2 lower limit of control on the road.