搜索资源列表
7260_1602
- 基于MMA7260三轴重力加速度传感器的1602液晶源程序-Based on MMA7260 three axle load force of acceleration sensor 1602 LCD source program
adxl
- keil编译环境下C8051F020驱动加速度传感器ADXL345的程序。采用的是I2C总线-keil compiler environment ADXL345 accelerometer C8051F020-driven process. Using the I2C bus
MY_XSENS_CODE
- 这是我自己写的xsen的mti系统程序,从陀螺仪和加速度计中实时读取数据,并在地理坐标系中进行解算,最后积分得到速度和位置信息。可以用于手势识别或者精度要求不高的导航系统。如果要用于精确导航,则应该进一步进行修正。程序使用com4进行通信,波特率是115200,采样频率是50hz,这些参数都可以修改。-This is my own writing xsen the mti system program from the gyroscopes and accelerometers to read
mma7361
- 基于mma7361加速度传感器测yoz面倾角测量程序-Mma7361 acceleration sensor yoz inclination measurement procedures
DE0_NANO_GSensor
- 该代码利用DE0 nano上面的ADI ADXL345三轴重力传感器实现重力感应,根据偏转角度的不同点亮相应方向上面的LED灯,稍加修改,还能够将各个方向上面的重力加速度值实时显示,希望大家喜欢-The code used DE0 nano gravity above the ADI ADXL345 three-axis accelerometer sensors to achieve according to the deflection angle of light in different
MMA7361
- 飞思卡尔加速度传感器MMA7361的资料(英文)以及用AVR128编写的驱动程序源程序。-Freescale accelerometer MMA7361 information (in English) and writing drivers with AVR128 source.
MMA7361V1
- MMA7361 模拟加速度传感器使用示例-MMA7361 accelerometer using the sample analog
mma7455--SPI-Protocol
- mma7455加速度传感器 SPI模式 stc单片机 New STC Acceleroter SPI Protocol-New STC Acceleroter SPI Protocol
7455-avr
- 三轴加速度传感器,通过串口输出XYZ三轴的值。-Three-axis accelerometer, the output through the serial port XYZ axis value.
jifen
- matlab基于频域的信号2次积分 主要用于 加速度信号 转为位移信号-matlab based on frequency domain signals 2 points is mainly used for the acceleration signal to the displacement signal
Trajectory
- 1.Target模块 (1)模块中目标的加速度a或加速度函数需要设定。 (2)模块的输出包括目标的速度和位置,可以通过已知条件进行求解。 2.Missil模块 (1)输入为导弹所受到的力与力矩。 (2)输出为导弹的位置、速度、姿态以及角速度。同时还有弹道坐标系向地面坐标系的转换矩阵EtoH与弹体坐标系向地面惯性系的转换矩阵DCM。 (3)模块中导弹的质量m或质量随时间的变化函数需要设定。 (4)模块中导弹绕弹体轴的转动惯量J需要设定 -Trajec
Strapdown
- 一、数据说明: 1:惯导系统为指北方位的捷连系统。初始经度为116.344695283度、纬度为39.975172度,高度h为30米。 初速度为v0=[0.000048637 0.000206947 0.007106781],飞行高度不变。 2:jlfw中为600秒的数据,陀螺仪和加速度计采样周期分别为为1/80秒和1/80秒。 3:初始姿态角为[0.120992605 0.010445947 91.637207](俯仰,横滚,航向,单位为度), jlfw中保存的为比力信
main
- 基于MSP430G2553的倾角测量仪程序,其数据采集使用的是三轴加速度传感器MMA7361-Based MSP430G2553 inclination measuring instrument program, data acquisition using triaxial accelerometer sensor MMA7361
51-lcd-mpu6050(1)
- MPU6050的测试程序,融合加速度与角速度的传感器-MPU6050 the test procedures, integration of acceleration and angular velocity sensor
MMA7455and7260
- 网上收集的飞思卡尔三轴加速度资料MMA7260和MMA74-Internet to collect information on Freescale' s three-axis acceleration and MMA7455 MMA7260
accelerate-sensor-to-high-system
- 基于MMA7455数字加速度传感器测高系统-Based on MMA7455 digital acceleration sensor measuring high system
MMA7260
- 飞思卡尔公司的MMA7260三轴加速度的详细资料,希望对大家有用-Freescale MMA7260 details of three-axis accelerometer, the hope that useful
bspline
- 三次B样条曲线、一阶二阶三阶导矢曲线。可用于绘制机器人B样条轨迹的位移、速度、加速度、加加速度曲线图-Cubic B-spline curve, a second-order third-order derivative vector curve. Can be used to draw the trajectory of the robot B-spline displacement, velocity, acceleration, jerk curve
MMA7455
- 基于51单片机的加速度传感器MMA7455例程,调试成功。-Based on 51 single-chip accelerometer MMA7455 routine
ADXL345
- 三轴数字加速度传感器ADXL345在单片机STC89C5的测试程序,使用 IIC协议 -Axis digital acceleration sensor ADXL345 the microcontroller STC89C5 test program, using the IIC protocol