搜索资源列表
96ad
- 基于si1000芯片的模数转换程序源代码,p0.6为模拟量输入口,可以通过uart输出数字量。编程软件为keil。-Based on-si1000 the analog-to-digital conversion program, p0.6 analog input port, through uart digital output. Programming software for keil.
CaptureIO
- 单片机上按UART的时序做的IO模拟串口-Microcontroller on the the UART timing of IO analog serial
UART_SoftwareImplementationApproach
- UART 异步串信口的硬件仿真和模拟设计与实现-UART,a Software Implementation Approach
analog-serial-communication
- 单片机模拟串口通信,uart通信,eeprom通信等。-Chip analog serial communication, uart communication, eeprom communications.
2440-Queue
- 2440开发板UART串口FIFO程序,模拟2440串口硬件自带的64字节的FIFO-2440 development board serial UART FIFO program to simulate 2440 serial hardware comes with a 64-byte FIFO
lpc17xx
- LPC17XX单片机例程,包括模拟量、CAN总线、I2C、I2S、UART、以太网、USB等例程。-LPC17XX MCU routine, including analog, CAN bus, Ethernet, USB and other routines.
UART_to_ir
- UART转IR发送,可通过串口接收红外指令通过C51单片机模拟发送,遥控电视机或其它家电设备-UART to IR sent via the serial port to receive infrared commands sent through C51 microcontroller simulation, remote control TV, or other appliances
UARTtest
- 基于s3c6410的ADC转换程序,转换结果经过UART发送到电脑终端,采用开发板内部自带的电位器来模拟电压变化-S3c6410 based ADC conversion process, the conversion result is sent to the computer through UART terminal, using development board comes with an internal potentiometer to simulate voltage varia
pnx1500_uart
- PNX1500系列没有串口,本代码为使用GPIO模拟串口的驱动-As there is no uart in PNX1500 series, these codes develop a simulative uart.
pdu1
- 基于microchip的MCU的倒车雷达的设计。 模拟传感器; UART通信;-The program is basic microchip.
ht66f50_uart
- 主要是对ht66f50这款芯片进行串口模拟,使得可以通过串口发送数据,因为其本身并没有常规的串口端-ht66f50 uart
SN8P2711B_Uart_test
- 松翰单片机写的串口通讯程序,用IO口模拟串口,芯片2711B,希望对于想模拟串口的初学者有用-use Io to similater UART with SONIX microchip, only TX part source code.
SPI(STC15F204PNRF24L01)
- STC51单片机GPIO口模拟串口,实现包含UART、SPI、IIC等-STC51 microcontroller GPIO port simulation serial port and realize UART, SPI, IIC, etc
wb_uart_latest.tar
- 实现一个一16750/16550 UART。该UART内核是完全基于另一个OpenCores的项目:UART_16750塞巴斯蒂安维特。 请找到有关于UART内核的文档。 该接口是现在有8位Wishbone总线兼容。 随着GHDL模拟器只需运行: ./ghdl_uart.bat 使用任何其他模拟器,开始模拟以下perl脚本必须运行之前: uart_test_stim.pl> FILENAME.TXT 其中,FILENAME.TXT是通用的“stim_
iic_uart
- 利用普通IO口模拟I2C从机,解决UART不够用的问题。TEST.c为主机部分代码,I2C_UART.C为转换器部分代码。主机为89C52,转换器为STC12LE5608.-Using ordinary IO port analog I2C the machine to solve the problem of UART is not enough. TEST.c for the main part of the code, I2C_UART.C for the converter part
Double-chip-conneted-by-IIC
- 双机模拟IIC通信,从机使用uart进行中断接收,成功解决了uart不够用的囧境。-Computer simulation of IIC communication, interrupt reception the machine using UART, successfully solved the UART with enough embarrassed exit.
uart1
- STC51的串口程序,通过STC51工具连接电脑可以用串口助手模拟-STC51 UART
pic9600uart
- pic单片机,利用io口模拟串口发送功能-pic,mcu ,simulate uart communication
uartSoftware
- 软件模拟串口发送 用单片机普通io口-uart txd
Timer2_uart
- stc 单片机使用Timer2模拟一个半双工串口-stc mcu Timer2 uart