搜索资源列表
1.CRC16-SW-HW-Demo
- MSP432 硬件CRC32 此处测试CRC16,软硬件分别在oled中显示-MSP432 CRC16 test program
FN90W20160616
- SSD1306驱动程序,适合所有SSD1306驱动芯片的OLED显示屏,成功调试,可用-SSD1306 device
DMP
- 四旋翼飞行器,主控芯片为MSP430F149,采用MPU6050陀螺仪的自带DMP功能。程序中还包含HMC5883L地磁传感器、24L01发送程序、EEPROM和OLED程序-Four-rotor aircraft, the master chip MSP430F149, using MPU6050 gyroscope comes DMP functionality. HMC5883L program also includes a geomagnetic sensor, 24L01 trans
OLEDIIC
- 这是本人第一次发帖共享一下资料,MSP430G2553超低功耗单片机操作功耗较低的炫酷型OLED显示屏,可以显示 6*8的小型字符,16*8的大型字符,14*16的汉字字符和logo。OLED对于DIY制作是一个比较高大上的显示平台,价格不算昂贵,体积不算大。上程序了,再上传个取模软件!关于图片的取模还希望大家指点一下,我没有搞成功!程序上面也有!-This is my first post about sharing information. Msp430g2553 ultra low po
MSP430-kalman
- 四旋翼飞行器,采用MSP430F149,通过卡尔曼滤波实现自稳。其中包括陀螺仪MPU6505、地磁HMC5883L、以及OLED、24L01和EEPROM-Four-rotor aircraft, the use of MSP430F149, Kalman filter to achieve homeostasis. Including the gyroscope MPU6505, geomagnetic HMC5883L, and OLED, 24L01 and EEPROM
cc2541_128bitUUID_per
- CC2541从机工程,基于1.4.0协议栈,IAR8.30, 实现了128bit的UUID,所有特征值属性读写都正常-CC2541, Realization of TI s protocol stack 1.4.0 128bit UUID, From the machine works, verified with OLED Display Features
UGUI-v0.3
- ugui是一个极为精简的gui框架,适合于嵌入式系统简单界面开发,只有两个文件组成,使用极为方便。-μGUI is a free and open source graphic library for embedded systems. It is platform-independent and can be easily ported to almost any microcontroller system. As long as the display is capable of show
084OLED
- 0.84寸OLED显示驱动,51例程。0.84 inch OLED display driver, 51 routine-0.84 inch OLED display driver, 51 routine 0.84 inch OLED display driver, 51 routine
STM32F4_OLED
- 基于STM32F407设计的OLED接口,实现OLED液晶的显示。-Based on STM32F407 OLED interface design, realization of OLED LCD display.
oledi2c
- oled12864 i2c接口驱动程序,含16X8常用SACII字库-i2c interface driver oled, including font
U8glib
- 使用U8GLIB库或SPI驱动OLED液晶屏,开发板 Arduino Mega 2560-Use U8GLIB library or SPI drive OLED LCD screen, development board Arduino Mega 2560
stm32-ContikiOS
- STM32 移植使用Contiki系统 1) 不仅是ESP8266驱动,整合了wifi模块、OLED显示器、烟雾传感器、关照传感器、温湿度传感器、超声波传感器,红外热释电传感器。 2) 目录结构: Documents - 说明文档 Hardware - 外围连接设备 Libraries - STM32库依赖项 Listing - 编译链接生成文件 Output - 编译输出文件 Project - 工程项目文件 User - 单片机内部及板
tempreture-control
- 溫度控制和oled顯示,主要由案件控制,隨溫度控制閥-Oled display and temperature control, controlled mainly by the case, with the temperature control valve
Software_OLED
- 基于msp430F5529的oled程序-OLED program based on MSP430
OLEDamsp430
- OLED 液晶驱东程序,使用msp430 -OLED LCD driver, use msp430
STM32_OLED
- STM32F103C8T6模拟IIC驱动OLED屏幕-STM32F103C8T6 simulation IIC drive OLED screen
DS1302_OLED
- 在C51上使用实时时钟芯片和OLED显示时间,此程序经过测试没有问题-Using real-time clock chip on C51 and OLED display time, the program has been tested and no problem
LCD_OLED
- CC2530外接OLED,采用4个引脚的OLED,程序实现OLED的显示-CC2530 external OLED, OLED 4-pin, procedures to achieve OLED display
oled
- SSD1306驱动芯片,反转显示,可以显示字库中所有的字体,并可显示自己定义的12*24的数字-SSD1306 driver chips, highlighted, and you can display the font of all fonts and their definition digital display 12* 24
STM32_OLED(C8T6)
- 本例程是一个OLED显示屏例程,配合本店OLED显示屏,可以显示状态和测试结果-This routine is a OLED display routine, with the store OLED display, you can display the status and test results