搜索资源列表
whiteread
- vb串口命令的发送和读取;可以运行可以采用串口调试器调试-send and read vb serial commands
ucos-c
- 压缩包中有基于ucos系统下的常用程序,有tim捕获,串口查询,串口中断,定时器中断,温度读取。-Compressed package based on common procedures under ucos system, there are tim capture, serial query, the serial port interrupt, timer interrupt, temperature reading.
serialDispDebug
- 针对单片机数据采集系统,用Matlab实现上位机,实现从串口读取采集数据并实时绘制信号波形,包括初始化主机串口、按照通信协议调用回调函数读取数据,并实时刷新波形显示。-For SCM data acquisition system, the Matlab computer, data read the serial port acquisition and real-time signal waveform drawing, including the initialization callb
STM32F407PJY-901
- STM32F407+JY-901,使用STM32F407单片机使用UART串口读取JY-901九轴姿态传感器的加速度,角加速度等数据。-STM32F407+JY-901, using the STM32F407 microcontroller using the UART serial port to read JY-901 9-axis attitude sensors acceleration, angular acceleration data.
CC2530-DS18B20--
- 读取单个ds18b20的温度并通过串口以及LCD显示,能够准确的到环境的温度值-Read a single ds18b20 temperature and through the serial port and LCD display, can accurately to temperature environment
ReadWriteSerialPort_By_Perl
- 设置指定串口配置信息,读取指定串口配置信息。-Make configuration for the target serial port, read the target serial port configuration information.
mycom
- 用QT编写的串口调试助手,可以读取多种通信协议传输的数据,可以自己定义参数-QT prepared using serial debugging assistant, you can read a variety of communication protocol to transmit the data, you can define your own parameters
chuankou
- 利用51单片机编写的串口读取温度C语言程序,同时在数码管显示温度,读取的温度可在上位机中显示。-Use SCM serial port to read the temperature of the preparation of C language programming, digital display temperature control, temperature readings can be displayed in the host machine.
DMP5.0-V3.0
- STM32F103读取MPU6050数据程序(采用DMP方式,串口打印姿态角)-STM32F103 read MPU6050 Data,using DMP mode。
LAN
- 使用labview时通过VSA串口连接仪器的VSA地址并发送SCPI命令以及读取返回信息-Use LabVIEW through the VSA serial port to connect the VSA address of the instrument and send the SCPI command and read back information
serialportst
- C#的串口通信数据读取,适合初学C#中对下位机数据串口通信不了解的-C# RS232 data read
stm32f4demo
- 基于keil4开发平台,芯片为STM32F4,代码包含了II2C读取气压计,标准串口读取光流传感器和GPS,SPI读取IMU6050.以及数据读取后的发送。-Based on the keil4 development platform, the chip for the STM32F4, the code contains the II2C read the barometer, standard serial port to read optical flow sensor and GPS,
Uart_receive
- STM32F4系列串口接收函数,,程序已测试通过。-void USART1_IRQHandler(void) //串口1中断服务程序 { u8 Res #ifdef OS_TICKS_PER_SEC //如果时钟节拍数定义了,说明要使用ucosII了. OSIntEnter() #endif if(USART_GetITStatus(USART1, USART_IT_RXNE) != RESET) //接收中断(接收
CSharp1-(4)
- C#串口控制,可以实现串口读取数据,检测串口打开串口的功能-C# serial control, Serial can read the data, open the serial port detection function
MagTek-DatasheetPsource
- 用51单片机和magtek实现磁卡三个磁道的解码,并读取磁卡的数据,输出到串口。-With 51 single-chip microcomputer and magtek swipe CARDS three track of decoding, and reads the file data, output to the serial port.
mini2440_simulation-SerialByIO
- 在mini2440上用IO口模拟的串口,采用异步通知的方式去通知进程串口数据读取完毕-Mini2440 on simulation of serial IO port asynchronous notification to inform the process of serial data read completed
CSharp-SerialPort-Read-DC1700-data
- 之前开发空气净化器项目用C#编写串口上位机程序,用于读取DC1700激光粉尘传感器和夏普红外粉尘传感器做数据对比和整合,程序涉及到SerialPort串口使用、NPOI库操作excel表格、数据曲线显示-Previously developed air purifier programs written in c# serial PC program, used to read DC1700 laser dust sensor dust and sharp infrared sensors to
OV2640_stm32f4_2_1_SVGA_double
- 这个是我自己写的用stm32f407 DMA双缓冲模式读取ov2640 摄像头(不带FIFO)SVGA格式图片的程序,并以串口的形式发送到上位机,帧率只能达到7-This is what I wrote it myself with stm32f407 DMA double buffering mode reading ov2640 camera (without FIFO) SVGA image format program, and send the form to the PC seria
ov2640_stm32f4_2_2_1_CIF
- 这个是我自己写的用stm32f407 读取ov2640 摄像头(不带FIFO)CIF格式图片的程序,并以串口的形式发送到上位机-This is what I wrote it myself with stm32f407 read ov2640 camera (without FIFO) CIF format image program, and send the form to the PC serial port
ov2640_stm32f4_2_2_SXVGA
- 这个是我自己写的用stm32f407 读取ov2640 摄像头(不带FIFO)SXVGA格式图片的程序,并以串口的形式发送到上位机-This is what I wrote it myself with stm32f407 read ov2640 camera (without FIFO) SXVGA picture format program, and send the form to the PC serial port