搜索资源列表
MP3
- 利用qt开发了一个MP3播放音乐的应用程序，改程序可以移植到S3C2440开发板-Qt development application for an MP3 music playback, change the program can be ported to S3C2440 development board
S2440zipa
- 三星S3C2440核心板， protell99格式，如它的,可以直接使用。 -Samsung S3C2440 core board, protell99 formats, such as it can be used directly.
adc
- TX2440A开发板ADC驱动，在linux-arm环境编译通过，可以使用，支持S3C2440系列-TX2440A development board ADC driver compiled by linux-arm environment, you can use to support the S3C2440 series
camera
- TX2440A开发板摄像头驱动，在linux-arm环境编译通过，可以使用，支持S3C2440系列-TX2440A development board camera driver compiled by linux-arm environment, you can use support S3C2440 series
TX2440A
- TX2440A开发板完整驱动，在linux-arm环境编译通过，可以使用，支持S3C2440系列-TX2440A development board complete driver compiled by linux-arm environment, you can use support S3C2440 series
makefile
- 该文档是s3c2440芯片的spi1接口在linux系统中驱动模块的makefile文件。可以直接在文档目录下执行make命令。-this file is the makefile of the driver of s3c2440 s spi interface。you can exercise the command make in the same pathetic。
SS3C2440SM5013
- S3C2440+SM501在wiince环境下的应用！可直接使用。 -S3C2440+SM501 in wiince environments application! Can be used directly.
UMYUCOSSC
- UCOS S3C2440 移植源代码码 ADS1.2 可以直接跑在开发板上 -UCOS S3C2440 transplant source code the code ADS1.2 can run directly in the development of on-board
test-procedure
- ARM9 S3C2440系列的程序代码，相信能对你们有帮助的。-ARM9 S3C2440 series of program code, to believe that we can help you.
pca9555
- PCA9555 vxworks下驱动，平台为S3C2440，该驱动注重效率，数据的传输和接收只用一个函数i2c_transfer，可以直接使用，编译平台为tornado2.2.1-Driver, PCA9555 vxworks platform S3C2440, the driver focus on the efficiency of the transmission and reception of data using only a function i2c_transfer can di
xr16788Sio
- vxworks下xr16788驱动，可以直接使用，编译环境为tornado2.2.1,平台为S3C2440-vxworks under xr16788 drive, can be used directly, compilation environment tornado2.2.1, platform for S3C2440
NOR-FLASH
- vxworks下nor flash的文件系统，只需要修改flash 容量就可以使用，该驱动在S3C2440和DM6446平台测试过，能直接用-vxworks the nor flash file system, only need to modify the flash capacity, you can use the drive in the S3C2440 and DM6446 platform tested directly
mcp2515
- MCP2515 vxworks下驱动源码，该驱动支持两路CAN总线，平台为S3C2440，编译环境为tornado2.2.1，可以直接使用-The MCP2515 vxworks driver source code, the driver supports two CAN bus platform the S3C2440, compilation environment for tornado2.2.1, can be used directly
rootfs
- s3c2440开发板上使用的yaffs根文件系统 支持linux-2.6.29内核，测试可用-A root file system of yaffs，which support to linux-2.6.29 kernel，can be used for s3c2440 development board
digital_photo_frame_8.5.5_5
- 基于s3c2440的嵌入式linux数码相框显示程序，内附汉字库、图形库、支持多方法输入可放大缩小图像，也可手动、自动浏览图像。-A digital photo frame base on linux(s3c2440) which can show pictures automatically as well as manually. It also can magnify or minify a picture according your meet.
vivi_2440
- 此vivi的源码是针对64M（小页）NANDFLASH的s3c2440开发板，编译出的程序能在64MNANDFLASH上运行-Vivi source for the 64M (page) NANDFLASH s3c2440 development board, compile the program can be run in 64MNANDFLASH
2440--basic-code
- s3c2440开发板配套的固定代码和自己的驱动代码，生成bin文件后可直接在开发板上执行。适合新手使用-s3c2440 development board supporting the fixed code and driver code, generate bin file can be executed directly on the development board. Suitable for novices to use
uCOS-II_S3C2440_v0.0
- Keil MDK 环境中，S3C2440的uCOS-II移植。 直接在内存中调试，比较方便。若需烧到NOR/NAND上运行，在S3C2440.s中，调用__main之前，添加上拷贝代码到RAM的代码，再调整复位地址处的跳转指令为相对跳转(B ResetHandle)即可。-The Keil MDK environmental, S3C2440 transplant uCOS-II. Direct memory debugging more convenient. For burn runni
hardware
- 这是基于S3C2440的底层裸机驱动代码，对于初学ARM9的朋友很有帮助。希望大家能尽快掌握这些知识。-This code is based on the S3C2440 the underlying bare metal drive, helpful beginner ARM9 friends. I hope that we can master this knowledge as soon as possible.
SPI2UART
- 开发环境Ubuntu10.10 内核源代码版本linux2.6.32.2 交叉编译环境版本V4.4.3 驱动函数说明： 该代码将S3C2440的SPI口连接SC16IS752，扩展为2路串口。代码分2部分，分别Make后生成2个.ko文件，分别加载即可使用。 本代码项目实用，可参考。-Development environment Ubuntu10.10 Kernel source code version linux2.6.32.2 Cross-compiler