搜索资源列表
strike_ha-0.1a.tar
- 嵌入式linux双机热备份倒换处理代码,用于提高电信或工业控制设备的稳定性,采用linux多线程设计。-embedded linux-hot backup switching handling code, used to enhance the telecommunications industry or the stability control equipment used linux multithreaded design.
Bios
- S3C44BOX的BIOS。可使用的命令:help --- show help ? --- = help date --- show or set current date time --- show or set current time setweek --- set weekday clock --- show system running clock setmclk --- set system running clock setbaud ------ set
PCM30
- SHIFT_8REG是8位的一个具有移位功能的寄存器,每一次数据打入都会从这个寄存器的最低位打入,并相应进行向左移位。 ODD_110BREG是一个3位的备份寄存器,寄存器中存放的是奇数帧的同步头,也就是110。 EVEN_9BHREG是一个8位的备份寄存器,寄存器中存放的是偶数帧的同步头,也就是10011011。这两个寄存器的初始值在系统一开始就打入。 -SHIFT_8REG is eight with a displacement of the functional Regist
FS44B0XI_BIOS
- 長高44b0xi BIOS源碼 FS44B0II BIOS具有啟動、引導,下載、燒寫,設置日期、時間,設置工作頻率等多種功能,並且支持各種參數的存儲和自動調用。 可以用flashpgm等軟件將BIOS燒寫到Flash中去,BIOS的自身駐留地址位于NOR FLASH的0x1f0000處,系統參數保存在0x1ff000以上區域中。所以在燒寫完BIOS,上電復位后先要執一定要執行backup命令把BIOS本身拷貝到NOR FLASH的高端1f0000去。
project
- Application Note Abstract This Application Note introduces a complete and detailed PSoC® project. Telephone Call Logger keeps the detailed record of approximately 945 phone calls (7-digit number is assumed to be one phone call) including date,
mt
- MT: windows NT/2000/XP command line tape manipulation written to format a tape windows-XP backup refused to write or format... and satisfy my curiosity Can be used for crude data recovery (combine seek and read)
ATmega88 4-digi LED clock
- 软件使用主时钟和RTC, backup电池掉电了也能跑! HT1381/DS1302 RTC, 7-SEG管为共阴, 软件中SEG为负逻辑,COM为正逻辑以便驱动三极管作高亮度显示。
SyncData.rar
- SyncML 协议的同步实现的数据备份,是基于wince平台,,也可很容易移植到其它平台,SyncML synchronization of data backup, is based on Jack platform, and can be easily ported to other platforms
3208LED.rar
- ★采用独特的 8 行 52 列 L 印点阵显示屏作为显示单元,其显示亮度高、自发光、无视角,制作者可以随意选择屏幕大小和发光颜色。 ★日期、时间、星期、温度全信息交替显示,所需信息一目了然。 ★采用专业时钟芯片 DS1302 和备用电池,时钟掉电依然走时,用户设置闹钟时间永久保存。 ★远离机身的温度传感器设计, 0 ~ 60 ℃ 环境温度显示更精确。 ★全功能菜单操作, 4 个按键操作,可加减调时,操作方便。 ★ 8 路独立闹钟功能,可以设置独立闹钟时间和模式,大闹生活每一天
fd11.rar
- PIC12F508写的一个读写(备份)SIM卡电话本的程序,Write a PIC12F508 to read and write (backup) SIM card phone book procedures
LED.rar
- 本程序配合上位机软件可以通过串口下载字模数据到单片机外接RAM中。达到随时改变点阵屏显示内容的目的 外接RAM为6264大小为8K, 6264外接3。6V的备用电池来提供数据备份功能。,This procedure with the PC software can be downloaded through the serial data to a matrix of single-chip external RAM. Reached at any time to change the dot
RC522.rar
- 经过实际验证之后的51单片机控制RC522的源程序.采用C与语言开发,提交的是keil工程.编译之后程序只有3k不到. 函数实现的功能如下:寻卡,防冲撞,选定卡片, 验证卡片密码,读取M1卡一块数据,读取M1卡一块数据,扣款和充值,备份钱包,命令卡片进入休眠状态,复位RC522, ,After the 51-proven SCM control RC522 of the source. Using C and language development. Compiled only af
supervivi_qq2440.rar
- QQ2440的bootloader,suppervivi2,利用jtag就能下载,实现内核备份功能,QQ2440 the bootloader, suppervivi2, the use of jtag can be downloaded from the backup kernel functions to achieve
M25P64
- ST的M25P64 FLASH驱动,非常全面,已经用到一个多个项目中,上传做备份,需要的可以参考。-M25P64 FLASH drive of ST, very comprehensive, has been using a multiple projects, upload do backup, need can reference.
STC_RFID_Src
- 采用STC89C52单片机做控制器完成对读卡芯片MFRC500的驱动.在keil开发环境下实现. 提供稳定可靠的关于射频卡操作的C51源代码,可以嵌入到各种系统中。这些函数包括:初始化寻卡、防冲撞、选卡、转换密钥匙格式、传送密钥、验证密钥、读卡、写卡、扣款和 充值、调钱包到缓冲区、备份缓冲区中的钱包、卡休眠、启动天线发射、关闭天线发射。-To do with STC89C52 SCM reader controller chip MFRC500 complete the drive. Kei
uartceshi
- 解压后再keil下打开工程文件就可以用了,采用lpc922单片机实现基于锂电池的通讯后备电源系统管理。系统前端采样使用oz8920芯片,采样后的数据通过i2c发送给单片机,单片机和主控计算机采样422通讯-Unzip and then open the project file keil can be used, with lpc922 MCU-based lithium battery backup power system management communications. Front-e
baojingqi
- 报警器的程序、PCB电路、原理图、及其相关资料-Alarm program, circuit, and related information
sc
- 51串口程序,中断方式,带接收缓冲区,备份上传-51 serial program, interrupt, with the receive buffer, the backup upload
拉等
- 遥控数字钟应用程序,应用于多种数字钟接口,可以遥控设备,省力。自制LED电子钟在很多电子报刊杂志上都可以见到,但大多数在断电后都要重新设置时间等 参数,给使用带来很多不便。也有用后备电池作为备用电源的,但往往体积较大。本文介绍 的LED电子钟克服了以往的弊端,而且采用了家电通用的红外遥控器进行控制,方便使用。 有一路闹铃输出,可以通过遥控器设置闹铃时间及允许与否。-digital clock remote control applications, digital clock used in a
su232
- 89C52 UPS后备电源 R232通信源程序-89C52 UPS backup power source communications R232