搜索资源列表
8位液晶屏LCM0825
- 8位液晶屏LCM0825的点亮源代码,本程序是从0到9循环显示,可以改变参数输入任意值。-eight LCM0825 LCD lit the source code, the procedure is 0-9 circle that can change parameters into arbitrary value.
shiziguiping
- 石子归并问题:在一个圆形操场的四周摆放着N堆石子(N<= 100),现要将石子有次序地合并成一堆.规定每次只能选取相邻的两堆合并成新的一堆,并将新的一堆的石子数,记为该次合并的得分.编一程序,由文件读入堆栈数N及每堆栈的石子数(<=20)。 (1)选择一种合并石子的方案,使用权得做N-1次合并,得分的总和最小; (2)选择一种合并石子的方案,使用权得做N-1次合并,得分的总和最大; -stones : a circle around the playground
LCD_75F2413
- 基于SPMC75F2413A的LCD驱动程式序, 使用128X64的液晶模块,包含有画线,画圆和BMP,字符串等显示处理,全部源码,完整的工程.愿对从事单片机开发的工程式师有用.-SPMC75F2413A based on the LCD driver program sequence, the use of the built in LCD modules include line drawing, Circle and BMP, string and other shows, all the
S3C44B0X例子程序1
- 5 ledblink -- 跑马灯程序 该项目在SDT2.51下编译调试。最简单的demo程序,运行后3个发光二极管轮流点亮。 6 timerint -- 定时器中断demo程序 该项目在SDT2.51下编译调试。将子目录timerint拷贝到c:\\ 下。 该demo程序的主程序是while空循环,定时器中断服务程序每500ms将3个LED反相。 在57600超级终端里也可以看到中断发生时的信息。 7 uart -- 串口测试程序 该项目在SDT2.5
L240128
- 液晶屏分为8行15列汉字源代码程序。 本例程未使用6963的文本模式,使用程序填入字模也足够快。程序以Youth所提供 的51例程移植过来,同时对有些地方做了简化处理,增加了画线画圆的例程,好在 6963的画点有专用指令,所以不用读屏就可以直接画点。-LCD screen is divided into eight 15 Chinese firms source code procedures. The routines of unused 6963 text mode, the
controler
- 用电键控制步进电机朝各个方向做曲线,圆和直线运动。-electricity stepper motor control in all directions so curve, circle and line movement.
S1D13305lcd320240
- 这是我做的针对S1D13305的驱动源码,我集成了ASCII码字库和一级简码汉字库,可以显示任意常用汉字和英文字符,另外还有基本的画线、圆、多边形以及填充等功能!但是由于画图时是边计算边显示,所以显示效果会有抖动,只需通过缓冲区作为中转站就可以解决问题,这个问题就让给使用者解决了! 如有问题可以发email给我,xianyun.wang@gmail.com-This is what I do against the S1D13305 driver source code, I integra
VcDemoOfuCGUI
- 这是一个移植到vc上的小型ucGUI,有助于容易理解GUI的实现和移植到嵌入式系统上,其中包括了Font,Widget,Window,Graphs(circle,line,poly,arc),LCDDriver,MemDev等。-This is a transplant of small vc ucGUI. easy to understand GUI to the realization and transplanted to embedded systems, including the F
stepperfourandsix
- 这个例子做的是去年全国电子电子设计大赛E题,悬挂运动控制系统(E题),我只做了画线和画圆两个部分,纯粹是玩,所以精度不是很高,终点定位精度误差差不多0.5cm左右,画圆在两个斜率无穷大区误差较大需要修正。 一开始我用的是L297+L298驱动,感觉脉冲相位控制比较麻烦,后来想到avr相对51的速度,用B口模拟脉冲,L293驱动。电机我用的是两个42BYG四相八拍六线步进电机,资料很好找。 这个试验做起来可能有点麻烦,比赛的时候需要特定的板子,就象附件E题里所示,注意电机转动的时候
Gui_e
- zlg 的GUI实例,包括嵌入式系统的窗口、菜单、画圆、直线、椭圆、矩形等。-zlg GUI examples, including the Embedded System window, menu, Circle, a straight line, oval, rectangle, and so on.
circle1
- 在嵌入式ARM板at91rm9200(型号ts-7300)下画一个圆并在屏幕上显示的源程序。-plate at91rm9200 (model ts-7300), painted in a circle and displayed on the screen of the source.
circbuff.tar
- 嵌入式Linux下circle buffer程序,也可用于非嵌入式
caculate-circle-areas
- 这个是一个计算圆面积的Qt程序只要你在Qlineedit中输入需要计算的半径长度,就可算出结果-This is a Qt program to calculate the area of a circle as long as you enter the need to calculate the length of the radius of Qlineedit in, you can calculate the results
circle
- this code will help you to draw a circle, the input is the radius and no. of point and the center point
circle
- VHDL routine to draw a circle using the midtpoint algorithm.
circle
- C语言生成生成圆,以及直线的方法。上半部分是完整的程序,下半部是一些方法-Generating circle C language generation, and the straight line method. The upper half is a complete program, the latter part ways! ! !
circle
- 简单示例,利用QTcreator画圆,固定圆心,圆的半径、圆心可调节,并显示坐标-A simple example, the use of QTcreator Circle, a fixed center, the radius of the circle, the center can be adjusted, and the display coordinate
12864-Test-to-draw-a-circle
- 单片机控制12864显示圆,也可以显示汉字-MCU control 12864 to draw a circle
51-core-circle-operating-system
- 基于51内核的圈圈操作系统提供创建任务,删除任务,任务调度,系统延时,任务挂起,发送消息,等待消息,CPU使用率统计,系统时间,串口发送、接收数据及串口资源管理等功能。-Based on 51 core circle operating system create tasks, delete tasks, task scheduling, system delay, suspend the task, send messages, waiting for news, CPU usage stat
Circle
- 1. 声明一个Circle类,有:数据成员Radius(半径),成员函数GetArea()计算圆的面积,构造函数Circle(float radius)进行初始化和析构函数。在主函数中创建一个Circle类的对象进行测试(输入一个数值,作为Circle类对象的半径,调用该对象的GetArea()求以该数值为半径的圆的面积)。-1. Declaring a Circle class are: data members Radius (Radius), member function GetArea