搜索资源列表
O128647.zip
- 基于KS0108控制器的图形点阵液晶模块程序,汇编形式.对于初次接触液晶的初学者来说,具有很好的参考价值-KS0108 controller based on graphic dot matrix LCD module procedures, compilation of the form. For the first-time exposure to liquid crystal beginners, a good reference value
C语言图形界面开发源程序
- 利用C语言开发图形界面的例程,使用前先察看包里的help.txt-use of C language development graphical interface routines, the use of the former first look at the bag help.txt
中断13H模式VGA模式C语言开发图形库
- 在DOS13号中断下开发图形显示程序的例程,很经典的示例。-interruption in its DOS13 developed procedures graphics routines, classic examples.
SVGADIB
- MSC或BC开发的SVGA图形开发库(允许使用300x200,640x480,80x600,1024x768等多种模式) 此开发库特别适合嵌入式系统-MSC or the development of the SVGA graphics development library (allowing the use of 300x200, 640x480, 80x600, and other 1024 model) is particularly suited for the developme
13505src
- 一个图形显示芯片s1d13505的应用程序,对这个芯片的开发很有用,可移植性强。-a graphics chip s1d13505 applications for the chip useful in the development, portability strong.
matlab_dystem_in
- 二阶系统的最小二乘一次完成算法辨识程序,图形的横坐标是采样时刻i, 纵坐标是输出观测值z, 图形格式为连续曲线-second-order system of least-squares algorithm for a complete identification procedures, graphics abscissa is the sampling time i, longitudinal coordinates of the output value of observation z,
St7920pP
- st7920是现在比较好用的一款液晶显示控制器,内部含有GB5中文字库,以及图形点阵。本文是ST7920的应用实例,并通过检验,共大家参考。-st7920 is now more user-friendly new LCD controller, GB5 contain internal Chinese font, and graphics dot-matrix. This is the Driver of application examples, and through inspection
用于FS2410的Qt嵌入式图形开发入门篇
- 用于FS2410的Qt嵌入式图形开发入门篇 Qt/Embedded 的开发环境可以取代那些我们熟知的UNIX 和WINDOWS 开发工具。它提供了几个跨平台的 工具使得开发变得迅速和方便,尤其是它的图形设计器。Unix 下的开发者可以在PC 机或者工作站使用虚 拟缓冲帧,从而可以仿真一个和嵌入式设备的显示终端大小,象素相同的显示环境。-for FS2410 Qt Embedded graphics development portal Part Qt / Embedded Devel
用于FS2410的Qt嵌入式图形开发实战篇
- t嵌入式图形开发实战篇 嵌入式应用的开发工作基本上是在工作站或是PC 机上完成的,我们在工作的机器上调试运行嵌入式应用,并将输出结果显示在一个仿真小型设备显示终端的模拟器上。在开发的后期,我们要根据我们选择的嵌入式硬件平台,将嵌入式应用编译链接成适合在这个硬件平台上运行的二进制目标代码,另外由于应用使用到了Qt/Embedded 的库,所以我们还要将Qt/Embedded 库的源代码编译链接成为适合在这个硬件平台上使用的二进制目标代码库。当一个Qt/Embedded 应用被部署到小型设
Nucleus_GrafixGS
- 与Nucleus Plus配套的图形库,提供与indows类似的图形件,还有一些简单的3D功能,可用于开发GUI。 包中附有移植说明,描述如何与显示驱动对接。 实际测试发现速度稍慢,主要原因是未利用芯片的2D加速功能。支持一般小窗口绰绰有余。-Nucleus Plus and supporting graphics library, and the upgrade of graphics similar pieces there are some simple 3D features c
VC_AD_TEST1
- ad板数据采集程序,用vc编的程序,用数据信号发生器在ad板接口连接发送信号后可以在窗口得到信号的图形-ad board data acquisition program, vc series of the procedures used in the data signal generator ad plate interface to send signals can get the signal window graphics
emGUI
- 嵌入式图形处理系统,emgui嵌入式图形处理系统,-embedded graphics system, emgui embedded graphics system,
sample
- 这是一个关于lgui嵌入式图形界面的编程实例,对开发嵌入式linux图形界面的开发很有帮助-on lgui Embedded GUI programming examples, to develop embedded Linux GUI development helpful
CTUXINGXUE
- 搜集的有关C语言图形学的教程,很详尽,欢迎下载!-collected in the C language graphics on the guides, detailed and download welcome!
一个工学习参考用的液晶屏驱动源程序
- 一个工学习参考用的液晶屏驱动源程序!可以显示文字字符和图形!-a reference for the study of the LCD driver source! Can display text characters and graphics!
E35G23_UCOS2_UcGUI
- 豪华板中E35G23的UCOS2+UcGUI图形系统2.76,UCOS_II测试程序说明,由hgxxx的ucosii2.71升级而来的!去掉了TaskLcd running显示,把这个任务作为GUI显示输出,类似于UCOS的例子1,在一个随机的位置显示一个随机数,只是允许一个任务调用GUI,没有显示cpu利用率、切换次数等信息!注意:~本程序适用于240×320 16级灰度液晶!去掉了TaskLcd running显示,把这个任务作为GUI显示输出,类似于UCOS的例子1, -luxury
44boxTESTdemo
- 此代码在SDT2.51下调试通过,可以在我的板子ARM DEVELOP BOARD V1.0上面跑!经测试也适应于恒丰公司S344BOX等采公板设计的开发板。在其上电以后LED会闪烁一下,接着串口0会输出一些系统信息 可以通过串口终端与系统交互,可以测试320X240 STN LCD,包括图形显示函数,ascii字符显示函数。-this code under the SDT2.51 debugging through, I can blame the ARM DEVELOP BOARD V1
NucleusGRAFIX
- NUCLEUS的图形用户界面(GUI),80多万行代码。多窗口的支持非常好,但是对中文的支持似乎不太好。呵呵,可以参考。-NUCLEUS graphical user interface (GUI), more than 80 million lines of code. Multi-window support is very good, but the Chinese seem to support is not very good. Oh, for reference.
embedded_gui
- 该文件为一个嵌入式GUI图形库源码,并附带了一个说明文档-the document as an embedded GUI graphics library source code, and accompanied by a documented
单片机设计图形化电子表
- STM32f103在LCD中设计图形化电子表