资源列表
qt-zip-or-unzip
- qt 压缩解压缩文件和文件夹源码,嵌入式应用资源一般都比较紧张,有需要的参考下。-qt zip or unzip a file/a folder,qt code.a project.
Qt-draw-a-curve
- Qt用串口读单片机温度数据画动态波形曲线,完整项目源码。-Qt draw a curve,the date receive from mcu.
my_cgi
- 嵌入式ARM远程视频监控项目中的一个CGI程序,通用网关接口程序,还要配置相应的网页。-Embedded the ARM remote video monitoring project in a CGI program, the Common Gateway Interface program, but also configure the appropriate page.
gpio_IRQ.tar
- 在DM365下实现的用一个GPIO脚实现中断,中断号,测试代码等内容完整。-DM365 under achieve GPIO pin interrupt, the interrupt number, test code is complete.
v4l
- 基于S3C2410视频采集设计,集成从摄像头采集数据写framebuffer实现-The designing for video capture
fimc
- 三星的照相机的驱动。包括ov9650和fimc控制器的驱动和v4l2的中间层-Samsung camera driver. Including ov9650 and fimc controller driver v4l2 middle layer
WINPM.EXE.tar
- 分区工具,可以在windows下将sd卡分成fat32和ext3或ext2分区-Partitioning tool, under the windows of the sd card into fat32 and ext3 or ext2 partition
2th
- 最简单的bootloader的编写步骤: 1. 初始化硬件:关看门狗、设置时钟、设置SDRAM、初始化NAND FLASH 2. 如果bootloader比较大,要把它重定位到SDRAM 3. 把内核从NAND FLASH读到SDRAM 4. 设置"要传给内核的参数" 5. 跳转执行内核 -The easiest the bootloader preparation steps: 1. Initializes the hardware: Off watchdog, set
5.1_color_lcd_test
- 基于ARM,S3C2410的液晶显示,实现ASCII码,汉字,横线,竖线的显示-Based on ARM S3C2410 LCD ASCII, Chinese characters, horizontal line, vertical line display
tvp5150
- 基于Linux的视频采集和图像预处理的驱动源代码-Driver source code for Linux-based video capture and image preprocessing
root_qtopia_2010_0925.tar
- s3c2440开发板的qt rootfs源文件目录-s3c2440 development board qt rootfs source file directory
Ralink-RT5350-SDK4.0
- 雷凌Ralink RT5350 最新SDK4.0资料,linux源码,交叉编译环境,UBOOT和应用-Ralink the Ralink RT5350 SDK4.0 information, linux-source, cross-compiler environment, uboot and applications