资源列表
HT1621
- 液晶显示程序--HT1621点亮全部位元
fs3c2410_jflash_ok
- 优龙板的ＦＳ２４１０在J-Flash ARM配置成功，可以１２Ｍb读写ＮＯＲＦＬＡＳＨ，操作稳定。-FS2410-long board excellent in the J-Flash ARM configuration successful, 12Mb can read and write NORFLASH, stable operation.
Init_LCM_FAIR_9326_400_240
- 亦力驱动3cun屏 init_LCM_FAIR_9326_400_240 -3’init_LCM_FAIR_9326_400_240
pm
- 实验一 模拟调制解调,调相波的调制解调，以及加噪滤波-Experimental an analog modulation and demodulation, phase modulation and demodulation wave, and with noise filter
driver
- freescale mc9s12h256 can driver
LCDDEMO
- 由8051处理器驱动的lcd显示程序，动态显示!! A M A Z I N G !!等字符。-Processor driven by the 8051 lcd display program, dynamic display!! AMAZING!! Other characters.
ISR_USART_Sample
- 单片机 MCU 串口中断实例代码，发送，接受中断-MCU microcontroller serial port interrupt example code, sending, receiving interrupt
AD9851
- 最简单的实现正先波的AT8951程序，是用C语言写的最基本的 我想对初学者肯定有用
struct_example
- A constant that represents the conversion rate between drachmas and euros. Note that the constant is declared as float. No check for illegal input values is done.-A constant that represents the conversion rate between drachmas and euro
ax.25
- Program for ax.25 (The AX.25 protocol offers both connected and connectionless modes of operation, and is used either by itself for point-point links, or to carry other protocols such as TCP/IP and NetRom.)
text
- 设有8bits符号数X存于外部RAM单元，按以下方式计算后的结果Y也存于外部RAM单元，请按要求编写程序。 -With 8 bits symbol number X stored in external RAM unit, according to the following way calculated results Y also exist in external RAM unit, please write a program as required.
SRAM_WR
- 本人自己经过实践检验的SRAM读写器，用Verilog编写的，可以作为FIFO使用。-I own proven SRAM reader, using Verilog prepared, can be used as a FIFO.