资源列表
mifaredxq
- 本程序段为mifare one 卡读写程序的子程序 也是关键程序，希望能给初学者一个参考吧
PC_I2C_BUS
- 在微机上模拟I2C总线的设计中，用并行口的D0（PIN2）模拟SCL信号，用D1（PIN3）模拟SDA信号。
Sailen
- sailen control for atmega128
DSP2833x_Spi
- 一个仪器仪表程序，可以做开发的参考程序！放心下载！2-An instrument procedure, the development of reference procedures can do! Rest assured Download! 2
ADC0809VHDL
- 文件名：ADC0809.vhd功能：基于VHDL语言，实现对ADC0809简单控制说明：ADC0809没有内部时钟，需外接10KHz~1290Hz的时钟号，这里由FPGA的系统时钟（50MHz）经256分频得到clk1（195KHz）作为ADC0809转换工作时钟。-File name: ADC0809.vhd features: Based on the VHDL language, easy to control implementation of the ADC0809 Descr ipt
TM12864Z1
- 12864液晶显示屏单片机驱动程序 51单片机适用-12864 single chip LCD driver for 51 MCU
phasevocoder
- PHASE VOCODER的FPGA实现-PHASE VOCODER FPGA Implementation
johnson
- 可以用按键控制的左右移动流水灯设计，同时加入了按键边缘检测技术，防止按键抖动-You can move around with the buttons control the water lights design, while adding a key edge detection technology to prevent the keys jitter
Buzzer
- 这个程序是一个DSP2812的蜂鸣器的子程序，它实现了通过按键来改变蜂鸣器的变化规律。-This program is a subroutine buzzer DSP2812, which implements a button to change the buzzer by the variation.
main
- 矩阵键盘实验。数码管使用P0,键盘使用P3.0、P3.1、P3.2、P3.3。按矩阵键盘分别显示在数码管上面显示十六进制的0到F。-Matrix keyboard experiments. Digital control using P0, keyboard P3.0, P3.1, P3.2, P3.3. Matrix keyboard are displayed in hexadecimal 0 to F. In the above digital
1602
- stm8关于1602的开发与应用，帮助了解1602的工作方式-STM8 MCU application examples
ADtoPC
- AD0809的驱动程序，读取并通过串口发送到电脑，已调试成功，可以使用，欢迎下载-AD0809 driver, read and sent through the serial port to the computer, has been successful debugging, you can use, welcome to download