资源列表
noui6
- 智能家居 登陆 播放器 家电控制 虚拟键盘-smart home
pca9698_gpio
- PCA9698是I2C总线的IO口扩展芯片。这是其linux 2.6.28下的驱动程序。-PCA9698 I2C bus is the expansion of the IO port chip. This is the driver under linux 2.6.28.
rtc_src
- Complete source code for MAXIM rtc chips.The source include following chips(ds164x,ds174x,ds1302,ds1306,ds1307,ds1337,ds1374,ds1556,ds12887)
mini2440-qtopia2.2.0-usb-camera
- 由于友善的mini2440没有提供qtopia2.2.0上关于USB摄像头图像采集界面的源代码，所以自己写了个，可以在qtopia2.2.0上采集视频的界面（前提内核USB摄像头驱动符合V4L2标准，本人用的是ZC301的摄像头），供大家参考。3G部分没有做，所以如果不想要的话可以在qt中把启动3G的插槽去掉，对比度亮度的插槽留出来了，想要的可以自己添加。-Because of the mini2440 did not provide friendly qtopia2.2.0 on USB ca
ADS1114
- TI A/D Converter ADS1115 C Source
rtl8188C_8192C_usb_linux_20120622.tar
- 该源码是realtek8176芯片在linux下的驱动源码，水星MW150U无线网卡即用此芯片，可将其重新编译，移植到嵌入式linux平台下。-The source code is realtek8176 chip driver source code under linux, Mercury MW150U wireless network cards that use this chip to recompile, porting to embedded Linux platform.
ONVIF_WSDL_2
- 最新的onvif协议，可以用gSOAP编译出C/C++代码。做网络摄像机有很大用处。-Latest onvif protocol can use the to the gSOAP compile the C/C++ code. Do network cameras are very useful.
aptina_9m034
- 美光9m034传感器宽动态和线性模式c代码，包含初始化和默认设置，如颜色矩阵、白平衡、曝光等；在arm-linux平台测试，是我们网络摄像机现在使用的美光驱动代码。-The Micron of 9m034 sensor wide dynamic and linear mode c code contains initialization and default settings, such as color matrix, white balance, exposure, etc.
hiled
- 海思HI3515，GPIO控制，控制核心板上的绿色LED灯，为GPIO0_4-Hass the HI3515, GPIO control, to control core board green LED lights for GPIO0_4
linux_usb_arm_pc
- 该程序实现基于linux平台的arm和pc机进行usb通信，包含pc机上的linux的驱动和测试程序，arm上的linux驱动和测试程序，-The program to arm and pc machine based on the Linux platform the usb communication contains the driver and test program for pc on linux linux arm on the drive and testing procedur
plotCenter
- 商业应用的切割机输出中心，通过以太网络传输文件，读取PLT图形，及单线体字体-Cutting machine output center for commercial applications, transfer files through Ethernet, read the PLT graphics and single line fonts
u-boot-1.1.6_OpenJTAG_nand_large
- 是修改后的uboot，支持大页nand，usb烧写程序-Uboot, modified to support large page nand usb programmer procedures