搜索资源列表
PMSM-speed-sensorless-control-method
- Permanent magnet synchronous motor speed sensorless control method 永磁同步电机的无速度传感器控制策略-Permanent magnet synchronous motor speed sensorless control method
fuzzy-adaptive-control
- 本文对传统的双杆机器人采用模糊自适应控制策略,实现机器人的轨迹控制任务,提高系统的鲁棒性能。-In this paper, the traditional double-pole robot using fuzzy adaptive control strategy, robot trajectory control tasks, improve the robust performance of the system.
iterative
- 本文将迭代控制策略应用于双杆机器人,对于机器人的位置控制可实现无差跟踪。-This article iterative robot control policy to a double-pole, no difference tracking for the robot position control can be achieved
T_ENGINE_MODEL
- Matlab/simulink环境下开发的,基于平均值理论的发动机动力学模型,适用于发动机或整车控制策略开发使用。-Developed under the Matlab/Simulink environment, based on the average of the theory of engine dynamic model, suitable for the engine or vehicle control strategy developed using.
ReaserchOf2MWDFIGSystem
- 在2 MW 双馈风电变流器的开发过程中,电磁暂态仿真是验证控制策略和制定相关技术参数的重要手段。建立 了2 MW 双馈风力发电系统电磁暂态仿真模型,介绍了电压空间矢量脉宽调制(SVPWM)技术在PSCAD/EMTDC 的 实现方法,真实反映了变流器的动态开关过程和谐波特性。另对网侧变流器的软件锁相环(SPLL)进行了优化设计, 使之能快速、准确地跟踪电网基波正序电压,有助于改善网侧变流器在电网不对称故障期间的动态控制性能。-2 MW doubly-fed wind power con
sandianpingguangfubingwangnibianqi
- 三电平光伏并网逆变器的控制策略研究 研究三相光伏逆变器的PWM控制及其并网控制-Three level of photovoltaic (pv) grid inverter control strategy research
simple_pid
- Truetime工具箱中简单的pid控制的实现,内含4种控制策略,可由matlab或者c++来实现-Truetime toolbox simple pid control, and includes four kinds of control strategies implemented by the matlab or c++
fess2
- 风机并网,分布式电源并网控制策略研究,采用双环控制策略-Fan grid, distributed power grid control strategy, the use of double-loop control strategy
Rate-Control
- 产生H.263+ 和MPEG4编码标准的一个重要动机就是为了提高压缩视频质量双向实时通讯的质量。在这些应用中,由数据累计的编码器缓冲产生的延迟非常的小,大多小于100ms,并且码率控制策略能有效提高编码高质量和降低编码延迟。-Produce H.263+ and MPEG4 encoding standards is an important motivation is to improve the quality of compressed video quality two-way real
1_5MWDFIG-kongzhixitong
- 本文设计了1.SMW双馈型风机变频器的整体硬件电路,满足风机整体工作的稳定 性和高效率"为实现LVRT功能,设计了一种新的CROWBAR电路,并对电路的控制 电路做了改进"研究了1.SMW双馈型风机变频器系统的控制策略,转子侧变换器采用 定子磁链定向矢量控制技术,网侧PWM变换器采用电网电压定向矢量控制技术,构建 了电流内环!电压外环的双闭环PI控制系统,导出了采用转子有功电流和无功电流独 立解祸来控制有功功率和无功功率的策略-This pape
vc2
- 异步电机矢量控制仿真模型,采用间接磁场定向控制策略,电机模型没有采用matlab自带电机,而是根据两相旋转坐标系下的电机方程自己搭建了一个电机模型。-Induction motor vector control simulation model, using the indirect field oriented control strategy, the motor model comes with no motor using matlab, but according to the two
Torque_distribution
- 开关磁阻电机(SRM)基于cos转矩分配函数的相转矩瞬时控制策略,效果理想-Switched Reluctance Motor (SRM) based on the torque distribution function cos instantaneous phase torque control strategy, the results are satisfactory
SKYhook_suspension
- 悬架系统的天棚阻尼控制策略,有效减低系统的动载荷,加速度-Ceiling suspension system damping control strategy to effectively reduce the system dynamic loads, accelerations
Electromechanical
- 基于矢量解耦控制策略,建立了适用于电力系统暂态稳定分析的直驱式风力发电机组机电暂态模型。为模型做了2 点合理假设:有功功率和无功功率在暂态过程中完全解耦;测量的电气量准确,和实际的电气量完全相等。基于这些条件,从实际的物理装置出发,对直驱式风电机组的电磁暂态模型进行简化。-Vector decoupling control strategy based on established for power system transient stability analysis of direct-d
TMD-ATMD-structure-control
- 对单自由度结构在无控与采用TMD和ATMD控制策略下的加速度和位移反应进行了对比,对比结果以图形方式显示。-The single degree of freedom structure s acceleration and displacement reaction are compared between with on control and using TMD and ATMD control strategy,the contrast results are displayed by u
PMSM_FOC
- simulink环境下的永磁同步电机的磁场定向控制,采用id=0的控制策略-simulink environment of permanent magnet synchronous motor field oriented control, using id = 0 control strategy
Droopcontrol329
- 可实现微电网中分布式电源的下垂控制,采用三环控制策略,节点既可作为V/f结点,也可作为PQ结点-It can achieve distributed generation droop control in Microgrid, which uses three-loop control strategy. The node can be used as V/f node, the node can also be used as PQ node
PMSM_FOC
- 永磁同步电机的矢量控制系统仿真,采用id=0的控制策略。在此基础上加入位置环,实现永磁同步电机的伺服系统-Permanent magnet synchronous motor vector control system simulation, using the id = 0 control strategy. On this basis, adding the position loop, to achieve permanent magnet synchronous motor servo
ECU-Design-and-Control
- 汽油机新型ECU的硬件设计与喷油控制策略研究-New gasoline fuel injection ECU Hardware Design and Control Strategy
DAMPPT
- 光伏电池阵列输出功率受光照强度和温度变化的影响,因此最大功率点跟踪(MPPT)技术广泛应用于光伏系统中。在所有最大功率点(MPP)控制策略中,扰动观察(P&O)MPPT算法因易实现被广泛应用,然而它的缺点是在稳定工作状态下工作点通过MPP 时会导致能量振荡损耗,并且在光照强度或温度发生突变时表现较差的动态响应。在本文中,提出一种改进型变步长扰动观察MPPT 算法,此方法依据工作点动态调整步长变化,与传统固定步长方法比较,本文提出的方法能有效地提高MPPT 速度和转换效率,通过仿真和实验结果分析,