搜索资源列表
AVR_UART_DIWEN
- atmega128A串口控制北京迪文触摸屏，实现闹钟和SHT11温湿度传感器显示程序，开发环境ICCAVR-atmega128A serial control Beijing Devine touch screen to achieve the alarm, and display temperature and humidity sensors SHT11 program development environment ICCAVR
SHT1x-(cn)
- 这是senseiron公司的温湿度传感器，已经翻译成中文资料了，很方便阅读，是做传感器的重要参考。-temperature and humidity sensors, data has been translated into Chinese, and very easy to read, do the sensor is an important reference.
51单片机数字温湿度传感器DHT21例程
- 51单片机读取DHT21温湿度，通过串口传递给PC机，汇编代码，有效测量温湿度
TQ2440温湿度传感器DHT11
- 前几天买来了一个DHT11温湿度传感器,然后决定使用把这个东西和天嵌2440连接起来,然后写程序读取温湿度传感器传送的数据
温湿度传感器SHT21中文技术手册
- 温湿度传感器SHT21中文技术手册
DHT12数字温湿度传感器V1.3-20160315
- 温湿度完整读写模块 ，官方手册，里面带两种通讯方式，单线以及官方完整iic(Integrated reading and writing module for temperature and humidity)
DHT11
- cc2530采集DHT11温湿度传感器，采集温度实验，调试成功(CC2530 acquisition of DHT11 temperature and humidity sensors, temperature acquisition experiment, debugging success)
SHT3X-51驱动
- 温湿度传感器SHT3X STC51单片机驱动程序 实用！(Temperature and humidity sensors, SHT3X, STC51 singlechip driver, practical!)
孵化环境温湿度监控系统设计
- 如果要将此应用项目移植到开发板上，只需要根据此项目的电路图修改管脚，改成我们开发板对应的管脚上。温湿度传感器使用的是DHT11，所以数据口按照原理图内接。温度传感器接口也需要修改成我们开发板对应的接口(If you want to migrate this application to the development board, you only need to modify the pins according to the circuit diagram of the project, a
DHT11
- DHT11温湿度传感器显示程序（STC12LE5608AD）(#include<reg51.h> #include<intrins.h> typedef unsigned char BYTE;)
DHT11温湿度传感器
- 湿度传感器，通过STM32来控制DHT11在液晶上显示空气中的湿度情况。(The humidity sensor controls the humidity of the air on the liquid crystal through the STM32 to control the DHT11.)
Si7021-A20
- 该文档为温湿度传感器芯片SI7021-A20的数据手册。(Temperature and humidity sensor chip SI7021-A20 data manual.)
dht11温湿度传感器
- STM32与温湿度传感器结合，在STM32上显示当前温度与湿度(The STM32 is combined with a temperature and humidity sensor to display the current temperature and humidity on the STM32)
温湿度传感器
- AM2301温湿度传感器 读数，一共40位数据，温度高8位，温度低8位，湿度低8位，湿度高8位.校验位8位(AM2301 temperature and humidity sensor readings)
MsTimer2
- 温湿度传感器在Arduino 单片机的烧写代码(Temperature and humidity sensors in the Arduino microcontroller burning code)
dh11
- 实现了基于TINY4412的温湿度传感器驱动 以及安卓的硬件访问服务(The temperature and humidity sensor driver based on TINY4412 and Android's hardware access service are realized)
HTU21D
- HTU21D温湿度传感器库，arduino代码(HTU21D humdity and temperature sensor lib.)
IIC
- stm8读取温湿度传感器程序，i2c直接读取数值，可直接复制使用！(IIC_SendByte((i2c_addr<<1)|0); IIC_RecvACK(); IIC_SendByte(reg_addr);)
蓝牙4.0传感器应用
- 基于蓝牙的传感器应用，包括温度传感器、温湿度传感器、光敏传感器、烟雾传感器、红外热释电传感器。(Based on bluetooth sensor application, including temperature sensor, temperature and humidity sensor, photosensitive sensor, smoke sensor, infrared pyroelectric sensor.)
20、CC2530温湿度传感器DHT11
- 基于CC2530的温湿度传感器DHT11的代码。实现温湿度的采集(Temperature and humidity sensor)