搜索资源列表
EVAL_C5131
- C89c51 usb驱动程序,实现了usb转串口的功能,提供了一个虚拟的串口-C89c51 usb driver, realizing the usb serial transfer function provides a virtual serial port
lm3s1138_adc
- 基于《Stellaris外设驱动库》的例程:处理器直接触发ADC采样 本实验演示配置ADC采样序列0,通过处理器直接触发ADC采样,ADC模拟量需从外部输入(ADC0),最大不能超过3.0V,因为ADC内置的参考电压为3.0V。 在进行ADC配置之前,必须首先进行PLL锁相环配置(详见EasyARM1138例程\02 SysCtl(系统控制)\3 锁相环PLL设置)。错误配置PLL将使系统进入异常。 ADC采样得到的数字量将利用超级终端从串口读出 。本开发板采用US
SimCom
- 这时一个wince驱动的底层函数,关于虚拟串口的,可以参考原理。-this is a wince6 driver to support sim uart. just for reference.
VirtualCOM_LPC2148
- LPC214X 虚拟串口通讯源码,包括USB1。1驱动源码和串口实现程序,对于开发串口应用(嵌入式系统)非常有用-LPC214X-LPC214X virtual com port source code, including USB1.1 driver and virtual com implementation, very useful for com port application
MTK6235_USB
- 这是一个驱动文件MTK6235 USB虚拟为串口驱动-This is a driver file MTK6235 USB virtual serial port driver
V20005-04-200i
- 虚拟串口设备驱动driverVirtual Serrial Device Driver2005.2.20 -Virtual serial port device driver driverVirtual Serrial Device Driver2005.2.20
com0com_com2tcp
- 虚拟串口源码com0com,对于学习驱动是好资料。-The virtual serial source com0com, driven learning good information.
STM32_USB
- 圈圈的USB自定义设备的上位程序+驱动+D12固件源代码,还有自己改的STM32的虚拟串口的USB固件。-Circle of a USB self-definition equipment the host program+ to drive+D12 firmware source code, also has its own reform STM32 virtual serial USB firmware.
USB_device
- STM32的USB DEVICE驱动库,可以做为HID和虚拟串口使用-STM32 USB Device driver library, can be used as HID and virtual serial port to use
usbclass
- 基于linux内核文件修改后得来的一个虚拟串口的驱动文件,展示了如何写usb驱动,适合初学者学习-The driver file a virtual serial port Linux kernel file modification to based, shows how to write USB driver, suitable for beginners to learn
ch340drive
- 340驱动,串口转USB口,可用于没有串口的笔记本做虚拟串口-340 driver, serial to USB port can be used without a notebook to do virtual serial port
vcom
- 创建虚拟串口,WINDOWS,驱动程序,驱动开发,ddk-Create a virtual serial port,WINDOWS,Driver, driver development, ddk
LabVIEW-Serial-assistant_2013
- 自己设计LabVIEW串口通信程序,能实现字符的发送与接收。程序使用LabVIEW2013设计,若要与硬件连接调试,请现安装VISA驱动,也可用虚拟串口调试程序。-LabVIEW serial communication program of their own design, to achieve the transmission and reception of characters. Program uses LabVIEW2013 design, to connect with the
STM_device
- STM32的虚拟串口WIN7&XP的驱动程序,欢迎大家下载体验-STM32 virtual serial port driver WIN7 & XP, welcome to download experience
BTSample
- 基于BlueSoleil驱动和BsSDK实现Windows上蓝牙适配器半自动关联SPP外设串口的操作,实现了设备扫描,配对,输入pin码,创建SPP蓝牙虚拟串口。-BlueSoleil drivers and BsSDK based on Windows Bluetooth adapter to achieve semi-automatic operation associated with SPP serial peripherals to achieve a scanning device,
STM32F103-DualCDC
- STM32F103 USB转双串口。使用CDC类。插上电脑后,会出来两个虚拟串口,如果提示找不到驱动,指定驱动路径到inf文件夹即可。 相比ST官方提供的只有1路串口的例程,方便了很多 用到的IO定义如下: 串口1:PA9和PA10 const GPIO_InitTypeDef TX1_pin { GPIO_Pin_9, GPIO_Speed_50MHz, GPIO_Mode_AF_PP } const GPIO_InitTypeDef RX1_pin { GPIO_Pin
meta_prokxamling-only
- 虚拟串口设备驱动程序 Virtual serial device driver-Virtual serial port device driver Virtual serial device driver
usbser.sys+mdmcpq.inf+
- 使用STM32F1或F4的开发板进行USB虚拟串口程序改造,必须在Windows上安装相应驱动。usbser.sys 复制到C:\Windows\System32\drivers, mdmcpq.inf 复制到C:\Windows\inf(The use of STM32F1 or F4 development board for USB virtual serial port program transformation, you must install the corresponding
eeicference-entity
- 虚拟串口设备驱动程序 Virtual serial device driver()
1053470
- 虚拟串口设备驱动程序 Virtual serial device driver()