搜索资源列表
QS-T280M3-P-LPC2214
- 奇烁电子的 QS-T280M3(2.8”TFT触摸屏)的资料,还有配套使用的电路图(单片机为ARM 三十二位的芯片LPC2214),C语言的源码(显示部分的,横向和竖向的都有)。-Qi Shuo Electronics QS-T280M3 (2.8 " TFT touch screen) of the data, as well as supporting the use of schematic (Thirty ARM MCU chip LPC2214), C language sou
inicodeR61509V
- 初始化代码R61509V,2.8寸TFT显示屏-Initialization code R61509V, 2.8-inch TFT display
GEC2410Demo
- 广嵌GEC2410开发板实验程序及PDF文档 GEC2410实战手册目录 一、基本接口实验 1.1 ARM汇编指令编程实验 1.2 Thumb和ARM指令混合编程实验 1.3 C和ARM汇编混合编程实验 1.4 C编程实现LED控制实验 1.5 ARM启动及工作模式切换实验 1.6 外部中断应用实验 1.7 看门狗定时器应用实验 1.8 PWM控制蜂鸣器实验 1.9 实时时钟及闹钟设计实验 1.10 Nor flash 应用
stm32_TFT_test
- STM32F103RBT6控制2.8寸TFT屏的整个工程文件,不带操作系统的,纯I/O口操作,代码少,特别适合初学者。-STM32F103RBT6 control of 2.8-inch TFT screen the entire project file, without the operating system, pure I/O port operation, code less, especially for beginners.
LGDP4535
- LGDP4535用于LG是2.8”的TFT LCD IC 驱动,240*320,效果已经过测试了。-LGDP4535+ LG 2.8”.
S6D0139
- 台湾PVI 2.8”玻璃,用S6D0139的IC,驱动效果已经调好。-PVI TFT LCD PANEL+ S6D0139, THE DISPLAY EFFECT IS OK.
ourdev_473545
- 直接用STM32接的摄像头,没有其他什么外加电路,stm32从摄像头读到数据,然后直接送往TFT(ILI9320芯片) 效果和速度:图像调整成了160x120,8帧每秒,320x240的时候大概是2帧 图像质量有待调整,刚实验成功中,激动中,所以先发裸照 完全使用中断的方式接收摄像头的数据 代码没有整理。 -STM32 directly access the camera, without any external circuitry other, stm32 read data from
ILI9325
- ILI9325底层源码,主要是驱动2.8寸的TFT屏。-ILI9325 CODE,
3.2tft-320qvt
- 用于点亮市面上普通的MCU 16位接口的TFT,本款为3.2寸,IC为HX8347A,如IC不同,只需更改初始化,并附带触摸屏的小程序及图字-To light up the market average MCU 8-bit interface of the TFT, IC is HX8340B, such as IC different, just change the initialization, and a small program with touch screen
tslcd_elt240320tp_and_tpA_avr_v1_10
- Specification of ELT240320ATP Display size => 2.8 inch Module Dimension (H×W×D) => 69.2×50 ×4.2 mm Active Area (W×H) => 43.2×57.6 mm Number of Dots (W×RGB×H) => 240×3×320 Dot Pixel size W/H => 0.18×0.18 mm LCD Type => TF
stm32_mp3_PICgui_for32
- 说明见stm32_mp3_PICgui_for28_7781。那个是2.8寸的TFT,这是3.2寸。-Explained in stm32_mp3_PICgui_for28_7781. That is a 2.8-inch TFT, which is 3.2 inches.
ucOS-II-V2.86-uCGUI-3.9-DEMO
- 演示了ucosII下的UCGUI的demo,采用了2.8寸TFT彩色触摸屏和STM32F103芯片-Demonstrates ucosII UCGUI under the demo, with a 2.8-inch TFT color touch screen and STM32F103 chip
TFT-GUI
- DMAVR-128板载了TFT液晶接口,液晶选用了TX05D99VM1AAA模组,该模组实际上 是一款手机液晶屏,包含主屏和副屏2个屏幕,尺寸大小1.8,分辨率分别为128x160和96x64, 最大支持26万色,用单片机控制也相对较简单-Onboard DMAVR-128 TFT LCD interface LCD use the TX05D99VM1AAA module, the module is actually A mobile phone LCD screen, and
lcd
- tft3.5寸彩屏 是经过在2.8寸的基础上改的,很有参考价值-tft-lcd driver Principle 1, in order to want to understand the liquid crystal display driver to provide good guidance
f407FSMCLCDupdate
- haoyu开发板基于STM32F407ZGT6 使用FSMC 驱动4531控制的2.8寸TFT 使用FSMC的NE1 RS接FSMC_A16
uCOS_DEMO_for_28
- STM32 开发的2.8寸彩屏程序,实现显示功能-Program of TFT Based of STM32
soft
- 基于ARM的CAN总线照明控制系统设计,主要采用了主从CAN节点进行网络通信,对照明等设备的定时开关控制。实验中,采用1个主节点,2个从节点进行实验。主节点采用LPC2119处理器和2.8寸TFT,从节点采用STC89C52作为处理器,SJA1000CAN从控制器-The design of intelligent lighting control system based on CAN bus
TFT_Init
- Please help me. I want to integrate TFT LCD display with LPC1766. I want to display text on 2.8 inch TFT LCD
TFT2.8_SD_BMP
- DMAVR-L控制2.8寸TFT彩屏显示SD卡中BMP图片测试程序(DMAVR-L control 2.8 inch TFT color display SD card BMP picture test program)
2.8-30(ILI9341 8BIT)(1)
- 初始化点亮ILI9341驱动的TFT屏程序(Initialize a TFT screen program driven by ILI9341)