搜索资源列表
LEDBLINK-S3C44B0X
- LED指示灯程序。应用于S3C44B0X ARM板上的LED测试，程序运行后，开发板上的三个LED指示灯会来回闪烁。-LED indicator procedures. Applied S3C44B0X ARM board LED testing, operating procedures, the development board of three LED lights will flicker back and forth.
led
- led测试程序，各种闪亮过程，依次，同时，间隔
AVR代码
- AVR代码集！里面包括LED测试，LCD显示，A/D八路循环检测等源代码-AVR code sets! They include testing LED, LCD, A / D Octal cycle testing source code
LED DZ_D 2.0 上位机
- led屏DZ_D 2.0 delphi接口 原来只有c接口 我把它改为delphi接口 附有动态库 测试通过
leds
- s3c6410的led测试源代码。
Draw
- led 屏幕测试专用，按 ALT+F4键退出程序-dedicated test screens led by ALT+ F4 key to exit
51622455ACT_LED
- LED指示灯程序。应用于S3C44B0X ARM板上的LED测试，程序运行后，开发板上的三个LED指示灯会来回闪烁。 -This example project shows how to use the IAR Embedded Workbench for ARM to develop code for the Atmel AT91SAM9261 evaluation boards. It shows basic use of parallel I/O, timer and the interr
LED
- LED提示显示屏测试程序，通过串口发送命令-Tip LED display test procedures, through the serial port to send commands
ledtest
- wince下led测试程序，具有较强通用性-wince under the led test program, with strong universal
LED-MAKE
- vc写的串口通信程序,并把接收的信息写入文件,已测试通过-vc writing serial communication program, and to receive information written to the file, have been tested
lsn8-9
- LED大屏灵星雨设置软件源程序，适合8、9版本，包含8、9版本可用的ledctrl.dll文件，已测试能通过DELPHI调用开、关屏，等操作，另外厂家还隐藏了几二十多个函数没说。-LED big-screen lsn to set software source code, for 8,9 version, contains 8,9 version available ledctrl.dll documents have been tested through DELPHI turn-on an
EMBEST_LED
- LED测试程序 点亮和关闭LED 只做了2个LED的控制-LED light on and off LED test program only had two LED control
LedControl1
- WinCE6.0下友善之臂的Led测试程序。-WinCE6.0 Led arm under the kind of testing procedures.
led-test
- zigbee CC2530 LED测试程序 网络层与应用层-Network layer and application layer
LED
- OK6410 ARM11 WINCE6.0 LED测试程序源代码和工程。VS2005编译-OK6410 ARM11 WINCE6.0 LED test program source code and engineering. VS2005 compiler
led
- quartus 工程 测试硬件LED Verilog 源码-the quartus engineering test the hardware LED Verilog source
顾显测试
- 点餐机LED显示驱动，Windows系统下运行(LED display drive for ordering machine)
LED
- 测试xds100开发板led灯，也可以作为单片机上电测试程序。(Test xds100 development board LED lamp, can also be used as the single chip computer test program.)
hello_s32k144
- LED测试代码，点亮LED，适用于初学者(LED test code, lit LED, suitable for beginners)
LED一体箱开发包_V3.9.1.4329_20171031
- 【声明】 此次版本测试 在对 LED03/EP-YTX030 /EP-YTX031,PT-V500/EP-G200/EP-G210 型号做 RS-485通信时 发现有丢包情况，建议客户采用 RJ45传输模式进行控制。如果客户强制使用 RS-485通信，可自己控制 发送指令间隔在200ms以上，可减少丢包率，但是建议客户慎重选择。 V3.9.1.4329_20171031 更新 1、更改 设置音量大小函数参数，规定音量大小的范围在 0-10之间。 2、更改 EP-YTX030 /E