搜索资源列表
complex
- 基于atmegal128的驱动程序，包括了串口打印，串口输入，I2C测试程序，写E2PROM，SPI测试程序，写FLASH-Based atmegal128 drivers, including a serial printer, serial input, I2C test program, written E2PROM, SPI test program, write FLASH
chuankou.STM32
- ARMSTM32.单串口打印程序。内有说明。-ARMSTM32. Single serial port print program. With instructions.
dayinji
- 51单片机驱动液晶进行打印的，使用串口进行控制，能打印各种字符-51 singlechip LCD driver for printing, use the serial port to control, can print a variety of character
weight
- 1、串口接收称重数据 2、fastreport打印 3、自带打印格式修改工具-1, the serial port to receive weighing data 2, fastreport print 3, comes print format editing tools
SerialPortPlot1
- 通过串口打印，可以直观看到变化规律，是测试ADC的好工具-Print through the serial port, you can visually see the changes in the law, is a good tool to test the ADC
DHT11_TSET
- 很好的51单片机温湿度传感器DHT11程序代码，采用串口打印温湿度传感器DHT11的返回值。大家可以拿来参考。-Very good 51 single-chip temperature and humidity sensor DHT11 program code, using serial port temperature and humidity sensor DHT11 return value. We can bring a reference.
TCP+UDP+串口RS232
- 这个是TCP+UDP+串口RS232一体化测试软件，我用它做TCP_Client可以接受TCP_Server快速大量数据发送，同时用串口监测TCP_Server打印信息，调试起来非常方便。(This is the TCP+UDP+ serial RS232 integration testing software, I use it to do TCP_Client, you can accept a large number of rapid TCP_Server data transmiss
5110
- 含有串口打印，进度条。中文英文图片等等十几个功能函数(stm8s 5110lcd lib Lambda Expressions)
单片机AD
- 使用单片机内部Ad，实现单片机AD十位采集数据，并且通过串口打印出来。可以啦，就这么简单(The use of single-chip internal Ad, to achieve single-chip AD ten bit data acquisition, and print through the serial port. Yes, it's that simple)
uart
- 在zigbee的裸机下，用IAR实现串口打印(To achieve serial print)
IAR5.5 MAG3110
- STM32硬件i2c驱动MAG3110，并将地磁信号串口打印(Hardware I2C driver MAG3110)
88
- 此程序能够烧入STM32实现距离测量 通过串口打印返回距离值(This procedure can be burned into the STM32 to measure the distance through the serial print return distance value)
检测矩阵键盘，将按下的键值打印到串口助
- 利用stm32f407芯片实现串口助手打印矩阵键盘的按键值(Use serial assistant print matrix keyboard key value)
滚球程序V1.0
- 电赛时获取小球位置并输出，支持串口打印图像(During the race, the ball position is obtained and output, which supports the serial port to print the image)
SerialPort.tar
- i.max283基于Qt5实现串口收发 最近将板子上的Qt版本升级到了Qt5,基于原生库实现了串口收发 1、对串口进行参数配置 2、打开了一个定时器，每3S发送一条命令 3、使用信号与槽机制，将收到的数据打印(qt serialport used for send and receive)
探索者 激光测距串口打印且液晶显示数据
- 在主函数中读取数据，提取到主函数中来，不需要按键(Read the data in the main function, extract it into the main function, and do not need the key)
print3D
- 送丝报警窗口，利用串口读取数据实现计时报警(Wire feeding alarm window, using serial port to read data to realize timing alarm.)
STM32F0xx_ADC采集电压配置详细并出口打印出来
- STM32F0的ADC采集，并通过串口打印采集电压(STM32F0 ADC acquisition, and through the serial port to print the acquisition voltage)
红外遥控键值
- 基于STM32的红外按键解码串口打印程序(STM32-based infrared key decoding serial printing program)
小票打印机免驱动打印
- 小票打印机免驱动形式打印。直接使用指令打印。 使用串并口打印