搜索资源列表
配置端口IO交叉开关译码器
- 利用单片机c8051f020由于端口功能很多,需要对端口进行配置。-C8051f020 SCM function as ports, we need the right port setup.
ucos51_code
- ucos在51单片机内的移植代码,包含配置文件,keilc编译器的文件等-CENTER MCU in 51 transplant within the code, including the configuration file, the compiler keilc documents
7113_set
- philips saa7113寄存器配置-Philips saa7113 Register Configuration
si4432实用配置程序
- 使用si4432时的初始化配置,是已经投入量产的,另外,射频波特率在38.4kbps以下的频偏推荐都为20kHz。
配置理解stm32中外部中断外部是怎么设置的
- 本程序是通过配置理解stm32中外部中断外部是怎么设置的和怎么配置引脚可以产生外部中断-This procedure is through understanding stm32 configuration in the external interruption external is how to set up and how to configure pin can produce external interruption
ov7725.CMOS图像传感器OV7725的寄存器配置信息
- CMOS图像传感器OV7725的寄存器配置信息,CMOS image sensor OV7725 registers configuration information
F02x_External_Interrupts
- C8051F020片内的外部中断如何配置及应用-C8051F020 chip and external interrupt how to configure the application
linux串口编程
- 改成小实现了linux系统下对rs232接口配置和使用,能正常的收发数据(Changed into small, Linux system to achieve the RS232 interface configuration and use, can send and receive data normally)
tft初始化程序
- 各种TFT彩屏寄存器初始化配置,包括9225、9338、9481(Various TFT color screen register initial configuration, including 9225, 9338, 9481)
keil参数配置
- keil环境下对系统参数的初始化设置进行可视化配置例程参考(Keil environment parameters configuration routines reference)
STM32F0xx_ADC采集电压配置详细过程
- STM32F103系列ADC详细配置过程(STM32F103 series ADC detailed configuration process)
adc
- 实现了飞思卡尔DZ60的时钟配置,有详细的代码注释(Realized the Freescale Carle DZ60 clock configuration, there are detailed code Notes)
STM8S103F3P6产生两路互补PWM波配置
- 搞了两天,总算使用STM8S103F3P6最小化系统板的TIM1产生两路互补的PWM波,现拿出来分享一下。工程为IAR环境,寄存器配置。(For two days, we used the STM8S103F3P6 to minimize the TIM1 of the system board to produce two complementary PWM waves, and now to share it. The project is IAR environment, register
书例_野火M3-CAN(Mutual)
- stm32f4的can通信配置例程,给新手小白看看(Stm32f4's can communication configuration routine)
project
- stm32的GPIO配置,做小车程序的一个工程模板,不用自己建立工程了,KEIL5可用(STM32's GPIO configuration, as an engineering template for the car program, does not build the project itself, KEIL5 is available.)
STM32F4_USART配置及细节描述
- stm32f4 串口配置,附详细说明操作,下载即可使用。(stm32f4 serial port configuration, attached detailed operation, download can be used.)
STM32GPIO配置
- 本源码为基于STM32配置GPIO的源代码,主要是基于GPIO的基本结构和工作原理、工作模式,实现对其寄存器的配置(This source code is based on STM32 configuration GPIO source code, mainly based on GPIO basic structure and working principle, working mode, implementation of its register configuration.)
set_ad9522
- 通过C语言配置ad9522寄存器,在DSP上可直接运行,已测试,想学习ad9522的是很好的资料。(Config ad9522 registers by C/C++ language.Running on TI s DSP testing procedures, can be run directly, want to learn ad9522 is a good information.)
编译器配置文件V1.8 IARVer
- HT系列单片机的IAR工程配置文件,覆盖相应目录即可,增加了IAR对HT系列单片机的支持(HT Microchip IAR configuartion file, overwrite relative directory, support HT series)
STM32F0xx_TIM输出PWM配置详细过程
- STM30F030的TIMER输出PWM配置详细过程(Detailed Process of PWM Configuration for TIMER Output)