搜索资源列表
ucOS-II-GPS
- ucOS-II 实例:GPS应用源码,可以掌握GPS通信原理,学习NMEA0183 ASCII接口协议格式。-ucOS-II examples : GPS application source code, can acquire GPS Communication Theory, Learning NMEA0183 ASCII Interface Protocol format.
TCP_Protocal
- 基于uC/OS-II操作系统,LPC2292硬件平台,实现与PC的TCP协议通信的程序源码
Modbus-Protocol-Driver
- Modebus通信协议的组包驱动源码,可以下载-Modebus driver package source group communication protocol
com_comserver1
- 本代码为在ARMLPC2210平台上,LwIP协议在UC_OS_II操作系统上的移植和实现;主要芯片有LPC2210、RTL8019S、TLI6C554(网口转4路串口通信)开发环境为ADS1.2-The code for the ARMLPC2210 platform, LwIP agreement UC_OS_II operating system and the realization of the transplant the main chip has LPC2210, RTL801
CAN_CTM_OK
- 在LPC2210平台,CAN通信协议在UC_OS操作系统中的实现代码;开发环境为ADS1.2-In the LPC2210 platform, CAN communication protocol in UC_OS the realization of the operating system code development environment for ADS1.2
IIC_FM24_OK
- 飞利浦ARM7,LPC2210上,IIC通信协议在UC_OS操作系统中的实现代码,开发环境为ADS1.2-Philips ARM7, LPC2210 on, IIC communication protocol in the operating system to achieve UC_OS code, development environment for ADS1.2
ucos_tcpip_44boxADS1.2
- tcpip 在44b0x板上的移植,ucos-ii,开发环境是ADS1.2。很长一段时间里,我没有在网上下到直接能在44B0X –RL8019 的ADS1.2环境下的 TCPIP 程序.而嵌入式之所以区别于8位单片机,最主要的是他能方便实现上网. 因此,学习嵌入式,没有掌握网络通信,算不上真正的嵌入式.于是自己根据网上下载 的程序,结合TCPIP原理,慢慢的修改, 终于程序能稳定运行了.现在的演示例子,同时能运行tcp和udp协议. Tcp的演示是通过一个小小的嵌入式网页来实现的, 而UDP
tcp
- 基于arm7的ucos操作系统,用tcpip协议的通信实验,是周立功smartARM2200开发平台的一个有用的例子,由于在ucos上很少有lwip的例子,所以这个源代码对有的朋友很有帮助。-ARM7-based operating system of uCOS, tcpip agreement with the experimental communication is Ligong weeks smartARM2200 development platform as a useful exa
COMM-ucos
- 在ucos上实现的通信协议程序,通信协议采用命令/响应包形式-At uCOS on procedures for implementation of communication protocols, communication protocol using the command/response packet format
0904031633
- 基于XC888 51内核单片机的 UCOS2移植 附有LCDGUI和 LIN通信协议驱动,在UCOS2基础上增加了堆栈溢出检测功能,提高操作系统运行的稳定性-XC888 51 core-based MCU with UCOS2 transplantation LCDGUI and LIN communication protocol-driven, based on the increase in UCOS2 the stack overflow detection, improve the
uCOS-II
- 嵌入式arm7的tcp/ip协议的实现,开发环境为ads1.2,可以实现tcp和udp的通信-Embedded arm7 the tcp/ip protocol implementation, development environment for ads1.2, can be achieved tcp and udp communication
EMF114
- 基于epa协议的电磁流量计的控制和通信,包括协议栈和功能块,用来控制现场总线设备通信卡模块的传输。-Epa protocol based control and communication of electromagnetic flowmeter
uc_Probe_communications_protocol_2.2
- 实时操作系统uc/os2 的监控软件uc/probe通信协议,对开发嵌入式监控软件有极大的参考意义-Communication protocol of Real-time operating system uc/os2 s monitoring software uc/probe Great reference value for developing of the embedded monitoring software
src
- arm7移植ucos2和Lwip协议,实现UDP通信,测试程序-arm7 transplant ucos2, and Lwip agreement to achieve the UDP traffic, the test program
MBSlave
- 基于stm32 的uc/os移植串行通信协议-Serial communication protocol based stm32 uc/os transplant
AT91SAM_uCOSII_Lwip
- 在AT91SAM7X平台上,使用lwip网络协议栈来实现和互联网通信,支持ARP,TCP,UDP等基础协议,方使实现远距离和大数据传输-On AT91SAM7X platform, using lwip network protocol stack to achieve and Internet communications, support ARP, TCP, UDP and other basic agreement, parties make to achieve long-range a
RS232
- RS232通信协议 由串口调试软件发送到串口,又返回至上位机-RS232 communication protocol sent by the serial debugging software to the serial port , and return to the previous bit machine.
ucos-project-ii-stm32c8t6
- stm32单片机-F103C8T6上实现了多任务的切换的ucos任务,实现了3路的串口数据的通信,串口数据接收的灵敏度比较高,其中一个串口通信是基于modbus协议,同时可以进行CAN的通信,需要的朋友可以根据自己的需要进行修改。-implemented on a single chip-F103C8T6 stm32 ucos task switching multitasking achieve three-way serial communication data, serial data
429
- udp协议通信,可以实现上位机与路由器之间的通信,用于以太网通信(UDP protocol communication)
node-original
- 在RTOS51上移植了SI4463无线模块的通信协议(Transplanting the communication protocol of SI4463 wireless module on RTOS51)