搜索资源列表
minicom_User
- minicom 是linux 操作系统下的串口终端程序 是和Windows 操作系统的下 超级终端功能相近的程序 不过比超级终端功能要强 下面我们通过命令行 介绍minicom 的操作方法-Minicom Linux operating system is the serial terminal program is the Windows operating system and the next Super Terminal functions similar procedures
44boxTESTdemo
- 此代码在SDT2.51下调试通过，可以在我的板子ARM DEVELOP BOARD V1.0上面跑！经测试也适应于恒丰公司S344BOX等采公板设计的开发板。在其上电以后LED会闪烁一下，接着串口0会输出一些系统信息 可以通过串口终端与系统交互，可以测试320X240 STN LCD,包括图形显示函数，ascii字符显示函数。-this code under the SDT2.51 debugging through, I can blame the ARM DEVELOP BOARD V1
HyperTerminal
- 基于8051单片机的超级终端仿真 超级终端，其实就一个输入输出设备，搞ARM的，这个东西可能再熟悉不过了，XP下就自带了一个，在 程序->附件->通讯工具->超级终端，可以看到。 我们通常是用基于串口的超级终端，即通过串口实现输入输出，来与CPU交互，控制CPU的执行。 -Super-based terminal emulation 8051 HyperTerminal, in fact, on an input output devices, engage
jdkz
- 电脑家电控制系统 本系统是利用电脑通过串口和单片机进行通信，从而通过电脑控制家电的开和关，也可用于其它地方控制其它电器。 此系统制作资料齐全，也很简单。 电脑上位机软件下载 电路原理图和PCB板图下载 源程序下载 1.本系统可以通过PC远程或者在家控制家用电器，为适应各种场合，只需更改上位机相应的LABEL的名称即可！（这点也是这个软件的不足之一，会在以后的时间里，慢慢完善。） 2.硬件原理图中，三端稳压管7805，未加任何散热装
serial_to_vga_terminal_AVR
- AVR mega8 vga video out fyl serial terminal
multidaq
- adc 0808 interfacing to 8051 microcontroller using keil compiler...multi channel data is displayed on pc terminal through serial communication
jhscd
- 利用串行通信工具作为人机交互终端，实现对板上硬件的控制。主程序开始应列出功能菜单，用户从菜单中选择功能并执行，终端应有及时的反馈信息。功能执行完毕回到主菜单。-Using serial communication tools as interactive terminals, on board hardware control. Start main function menu should list the user from the menu and to perform, the term
CRC
- 在使用终端设备采集数据的时候，使用串口传回并进行CRC校验，此为CRC校验代码-Data collection in the use of terminal equipment, when returned using the serial port and the CRC, the CRC check code is
8.4b
- 将AD转换值换算为实际的电压值，并将其从串口发送到电脑的超级终端显示，显示的结果保留两位小数,飞思卡尔 HCS12系列-AD conversion value will be converted to actual voltage value and sent to the computer from the super serial terminal display, showing the results of two decimal places, Freescale HCS12 fami
1160037925_1_FT224_iso7816_vcc
- iso7816_plain.c implements an interface between an RS-232 serial port and an ISO 7816 smart card, and is targeted for the Atmel AT90S2313 microcontroller in a development terminal. The source code is written entirely in C using the WinAVR tool suite.
master
- 基于nrf24le1的无线接射端源程序，并将接收到数据通过串口传给PC，可以通过控制命令激活或不激活发射端无线芯片。-Then shot based nrf24le1 wireless terminal source data is passed through the serial port to the PC and received by the control command to activate or not activate the transmitter side the wir
Zstack-ADXL345
- 基于zstack协议栈的adxl345传感器通信代码，协调器建立网路后终端自动加入，将传感器数据发送给协调器，协调器通过串口将数据传输给PC。 使用IAR编程环境，文件夹内已附带协议栈，打开project-zstack-Samples-CC2530-ADXL345-CC2350DB下的TestC.eww可直接运行-Based the ADXL345 sensor communication code zstack protocol stack, coordinator create a n
little-car-send
- 小车采用STC12C5A16S2（主单片机）可以实现测量前方障碍物的距离，并实时发送给从单片机STC89C52，之后从单片机通过串口发送给电脑，此文件为发射端程序 -Car used STC12C5A16S2 (main MCU) can measure the distance between the front of the obstacle, and real-time to the slave microcontroller STC89C52, then sent from the mi
SRC
- 在mini2440开发板上实现对EEPROM的读写，并通过串口显示在终端上！-Mini2440 development board to achieve the EEPROM read and write, and through the serial port on the terminal display!
kavr-0.4.tar
- AVR Hexfile Boot Loader kavr (pronounced caviar) is an Atmel AVR boot loader written entirely in GNU C. kavr is tiny (less than 512 bytes). No special tools are required on the host PC for updating AVR firmware. Any serial port terminal works fine
RealTimeClock
- STM32实时时钟作为定时器，通过串口线与计算机相连接，在电脑端打印当前的时间信息，每一秒更新一次。-STM32 Real-time clock as a timer, via serial cable connected to the computer, the computer terminal prints the current time information is updated once every second.
pic18f2550-usb-izole-triyak-kontrol-ccs-c-visual-
- Than 8 switch outputs Port B of the PIC18F2550 is used. Power gets the circuit from the USB port. Power supply is separate from the microcontroller and the computer galvanically. switching signals USB socket intended as a virtual serial port COM4. To
ADC_UART_TEST
- This application helps in understanding the ADC peripheral in PIC microcontrollers. The analog voltage is applied to analog pin AN0(PORTA0) of the microntroller. The resultant digital data is put on serial port. The Terminal settings for PC are
osciloskop
- This code is for atmega8. Project is describe in AVR studio. Output signal is transfer trough serial link to matlab terminal.
ZStack-CC2530-2.5.1a
- CC2530，协调器建立网路后终端自动加入，将传感器数据发送给协调器，PC通过串口控制zigbee温度采集启动与停止.-CC2530, coordinator after the establishment of the network terminal is automatically added, the sensor data are transmitted to the coordinator, the PC through the serial port control ZigBee