资源列表
HARDWAREIIC
- USE HARDWARE IIC TO READ THE MPU6050DATA ，I HAVE TEST it and passed
sc1045
- sc1045 linux摄像头驱动程序,测试能用-sc1045 linux drive
52904-1326909-cryptosysteme-elgamal-librairie-gmp
- Cryptosystem ElGamal developed in C-Cryptosystem ElGamal developed in C++
linux-2.6.24
- linux内核源码，供有兴趣的人一起学习。-linux kernel source code, for people interested in learning together.
HexCmp
- HexCMP full very good version of it!
123
- 深度优先搜索算法，CPP文件，-Depth-first search algorithm
25fb_drv_doublebuffer
- 开发板4412_ARM9开发，通过framebuffer控制电容屏，设置部分驱动方法：* 需要先关闭内核中的framebuffer驱动，否则会冲突 make menuconfig -> Device Drivers -> Graphics support -> Samsung S3C framebuffer support 同时要确保CONFIG_FB_S3C_NR_BUFFERS生成 程序里面有详细注释，中文注释-Development board 4412_
04misc_ioctl
- 开发板4412_ARM9开发，通过使用miscdevice驱动框架构建设备结点，开发测试gpio和key驱动测试，测试使用ioctl函数调用实现，里面猪油详细注释；-Development board 4412 ARM9 development, through the use of miscdevice driver framework to build device nodes, development and testing gpio key drive test, the use of
01i2c
- 开发板4412_ARM9，通过I2C驱动操作EEPROM设备，里面注有详细的解释，手册可以上网搜索，非常之多！！希望对你开发有所帮助-Development board 4412_ARM9, I2C drive through the EEPROM device operation, which note a detailed explanation, the manual can search the Internet, very much! . I hope to help you deve
01lcd_font
- 针对友善之臂4412开发板裸机下操作LCD显示驱动，注：Lcd的背光默认没有开启，可以通过先加载linux内核来开启背光，然后按reset键重启进入u-boot来运行自己的程序；-Note 4412: Lcd s default backlight is not turned on, you can first load the linux kernel to open the backlight, and then press the reset key to restart into the
driver_kernel
- 在sysfs中注册自己的设备，这将导致udev创建相应的设备节点，完成驱动net设计-register your own device in sysfs, and this will cause udevd to create corresponding device node
VB7432
- 使用VB6.0编写的一个调试凌华7432板卡的工具-VB6.0 prepared by the use of a debugging ADLINK 7432 board tools