资源列表
1th
- 主要用于加载内核启动，包括一些硬件初始化操作等-Primarily used to load the kernel starts, including some hardware initialization operation
can_test
- 基于linux的can总线读写测试程序。可直接通过makefile编译。-linux can bus test
vim
- 配置vim，使之成为一个C语言IDE，功能包括语法高亮，跳转，文件目录，taglist等-vim configuration.
s3c2410_ts_26
- mini2440开发板的触摸屏驱动程序！基于linux2.6内核！-mini2440 development board touch screen driver! Based linux2.6 kernel!
nt35520
- NT35520 QHD mtk 6589平台 MIPI DSI 参考代码-NT35520 QHD mtk 6589平台 MIPI DSI ref code
caozuoxitongkeshe
- 华中科技大学 操作系统课设 2012年版 成绩90+ 完整实现 -Huazhong University of Science and Technology classesbasedoperatingsystem.Rar 2012 edition scores 90+ complete implementation
serial
- 串口驱动程序 ，华为和思科通用串口驱动程序。-Serial port driver, Huawei and Cisco Universal Serial Driver.
RT3070_Linux_STA_v2.0.1.0.tar
- edimaz 7711umn linux driver
motorcontrol
- 自己做的测试电机的程序,请高手看看有没有需要改进的地方-motor text
clock
- 单片机时钟程序，调试已经完成，初学者可以参考。-Single-chip clock procedures, debugging has been completed, beginners can refer to.
bmp085
- 在linux 2.6下 读写BMP085 气压温度传感器I2C驱动程序-In literacy BMP085 pressure under linux 2.6 I2C temperature sensor driver
VGA
- 基于FPGA的VGA的实验演示及vhdl源代码-Based on the experimental demonstration of VGA and FPGA vhdl source code