资源列表
chap5
- 系统辨识”是研究如何利用系统试验或运行的．本代码是系统辨识的最小二乘法-MATLAB ANOUT SYSTEM
Tugasgrafkom_0102516901
- star is very nicwe and very very wo-star is very nicwe and very very wowwwww
117spectrumanalyzer
- 此软件为网络分析仪的上位机软件，软件基于Liberty Basic开发。硬件接口为并口或USB口。支持的硬件平台也是开源的，可以实现网分，频谱分析，扫频仪，LCR等一系列应用。(This software is the upper computer software of the network analyzer, and the software is developed based on Liberty Basic. The hardware interface is a parallel
ADS8365ctl.v
- 用vhdl实现控制ads8365芯片的转换(Using VHDL to realize the control of ads8365 chip conversion)
PLZwithdatareturn
- 和普通云台程序相比，此软件不仅可以控制云台转动，还可以把云台的方位角度回传给后台，以便后台利用这些数据进行融合处理。(Compared with the ordinary PTZ program, this software can not only control the pan tilt rotation, but also can return the azimuth angle of the pan head to the background, so that the backgrou
IOTest
- 并口的一些编程操作, 喜欢的可以下载看下,内置了驱动(Some programming operations that are connected, like you can download and see, built in the driver)
modsim32模拟器
- PLC通信调试模拟器，有接口文件，调用接口文件可以对PLC通信、模拟编程(PLC communication debugging simulator, with interface file, calling interface file can communicate with PLC and simulate programming)
xds510_win
- 一个老外写的用软件模拟ti公司的dsp硬件仿真器。-a foreigner to write software simulation of the dsp ti hardware simulator.
FluteD2_Jtag
- 利用并口来实现JTAG测试，其中需要安装驱动-Parallel Port JTAG testing to realize that it was necessary to install the driver
printerdriver
- 并口打印机驱动源代码,看看用不用得上-parallel printer driver source code to see would apply
LPT_I2C_ADuC
- CVI 环境,按照Analog公司提供的通信协议,利用并口模拟I2C总线.编写的ARM7内核芯片ADuC702x下载软件,-CVI environment, in accordance with the company's Analog Communication Protocol, Parallel simulation using I2C bus. prepared by the ARM7 core chips ADuC702x downloading software
mt48lc2m32b2
- the verilog model of sdram-mt48lc2m32b2 device.-the verilog model of sdram - mt48lc2m32b2 d evice.