搜索资源列表
s3c2410adc.tar
- 基于s3c2410芯片的数据采集系统 目标环境:S3C2410芯片、经裁剪后的linux2.6内核、sqlite数据库、cgi库 项目描述:节点端采集数据,并通过网络把数据传给服务器端。 服务器接收数据,并把数据保存在数据库中。 服务器可以通过CGI程序远程控制节点发送数据的时间间隔。 该系统还有配套的数据库本地查询系统和基于CGI的网络查询系统。-S3C2410 chip-based data acquisition system target environment: S
Etherner
- 本课程设计的目的是模拟Ethernet帧的发送过程,使读者熟悉Ethernet帧的数据发送流程,即CSMA/CD32运作流程: 1)、用两个线程a和b来模拟Ethernet上的两台主机。 2)、用一个双字类型变量Bus来模拟总线(将其初始化为” \0”,并且总线等于”\0”时 表示总线空闲)。 3)、两个子线程向总线发送自己的数据。数据用该线程的线程号进行模拟,发送数据用线 程号和Bus的“或”操作进行模拟(即Bus=Bus|ID,ID为该线程的线程号)。 4)、
51uart
- 串口调试程序 1. 发送过程:在发送时必须保证TI=1:即发送缓冲器为空,否则将导致数据发不出去,如果想强制发送可以用:TI=1.具体发送数据:利用printf(“akjdfaklfj”) 函数直接发送即可。 2. 接收过程:在接收时多选用中断方式,这样可以节约CPU的时间,提高效率, -1 serial port debugger. Send process: to be sent to ensure that TI = 1: that is, send buffer is
ThreadSockect
- 使用数据报(UDP)创建并初始化套接字,接收发送数据-The use of datagram (UDP) to create and initialize the socket, the receiving send data
LANmonitor
- 局域网屏幕监控系统是主要由客户端和服务器端两部分组成。 客户端模块 该模块主要用于抓取屏幕信息,进行数据压缩,然后划分数据报,向服务器端发送数据,并等待服务器发来的确认信息。 服务器端模块 该模块主要用于接收客户端发送的数据报,然后向客户端发送确认信息,接着组合数据报为JPEG数据流,最后显示JPEG图像。-LAN monitoring system is the main screen by the client and server-sid
cktx
- 微型计算机发送数据到单片机,单片机接受数据后又发回微型计算机,并在微型计算机屏幕上显示-Micro-computer to send data to a single-chip, single chip to receive data and then back to micro-computer and micro-computer screen
uart-test
- avr单片机每隔一段时间就通过串口给上位机发送一段数据,然后等待上危机处理-Single-chip avr from time to time through the serial port to the host computer to send a section of data, and then wait for the crisis management
capture
- arp,tcp,ip,udp数据包的捕获,和一个简单的发送数据的例子程序-arp, tcp, ip, udp packet capture, and a simple example of sending data procedures
232mscomm
- labview使用rs232串口实现数据采集及控制,可接受及发送数据-labview using serial rs232 data acquisition and control, acceptable and send data
fifo
- 同步FIFO 创建一个256x8大小的同步FIFO,并通过串口发送数据初始化FIFO,FPGA内部读取FIFO的数据通过窗口发送到PC-FIFO
cc1100LSD
- RF-CC1100接收和发送数据测试程序源代码-cc1100
CS
- tcp 发送数据 服务器 客户端聊天程序 基于VS开发环境-tcp vs c#
serialcommunication
- 自己编写的串口通信上位机。一直工程在用,其中的发送数据我已经做了修改!-the programme of serial communication
QtComAssist
- 用QT编写的控制台,用于和串口通信,功能是关闭,打开串口和接收发送数据-Written with QT console, for, and serial communication function is off, open the serial port to send and receive data
USBLCD
- 通过USB接口给单片机发送数据,然后单片机再将其显示在LCD上-To the microcontroller through the USB interface to send data, and then microcontroller and then display it on the LCD
VC6Comm
- 在VC++6.0中用MSComm控件编程,可以实现串口接收数据和发送数据,数据分别显示在接收框和发送框中。-In VC++6.0 using MSComm control program can be achieved to receive serial data and sending data, the data shown separately in the receiver box and sent box.
ThedesignofUniversalAsynchronousReceiverTransmitte
- 本课题所设计的UART支持标准的RS.232C传输协议,主要设计有发送模块、接收模块、线路控制与中断仲裁模块、Modem控制模块以及两个独立的数据缓冲区FIFO模块。该模块具有可变的波特率、数据帧长度以及奇偶校验方式,还有多种中断源、中断优先级、较强的抗干扰数据接收能力以及芯片内部自诊断的能力,模块内分开的接收和发送数据缓冲寄存器能实现全双工通信。除此之外最重要的是利用口模块复用技术设计数据缓冲区FIFO,采用两种可选择的数据缓冲模式。这样既可以应用于高速的数据传输环境,也能适合低速的数据传输场
com
- 调试串口,从串口发送数据,从串口接收数据-Debug serial port, from the serial port to send data, receive data from the serial port
serialPort2012.01.11
- Java串口通信RXTX程序, 1. 能够接受下位机数据。 2. 保存接受的数据。 3. 把接收到合法的数据打印出来 4. 能够发送数据。 5. 程序能够设置常用串口参数。-Java RXTX serial communication program, 1. Can accept a lower level computer data. 2. Save accept data. 3. It recei
《算法与数据结构》实验报告
- 利用赫夫曼编码进行通讯可以大大提高信道利用率,缩短信息传输时间,降低传输成本。但是,这要求在发送端通过一个编码系统对待传数据进行预先编码;在接受端将传来的数据进行解码(复原)。对于可以双向传输的信道,每端都要有一个完整的编/译码系统。试为这样的信息收发站写一个赫夫曼的编译码系统