搜索资源列表
key_piano
- 按键消抖，Verilog编写，可用用，在quartus仿真过，也下载到FPGA开发板啦，可用。-Verilog code, available to use, in the quartus simulation, also downloaded to the FPGA development board, is available.
sw_xiaodou
- 基于verilog的按键消抖控制led程序-Based verilog button debounce control led program
keyin
- 这是一款用！！ VHDL！！！语言编写的！！ 按键消抖！！ ！！。-This is a written in！！！！ VHDL！！ language ！！！button away shaking！！！。
key_debuouce
- veriolg 按键消抖的程序,可以写成模块，后面直接调用-verilog key debounce
KEY1
- 基于stm32f4的按键消抖程序：包括配置系统时钟，按键端口初始化，设置中断模式，配置KEY连接的IO口及其中断，配置中断触发条件并使能。-Based on stm32f4 keys away shaking procedures, including configuration system clock, KEY port initialization, interrupt mode, the configuration is the KEY link of I/o port and inte
key_detect
- 由verilog编写的简单的按键消抖模块。主要是由“电平检查模块”和“10ms延迟模块”组合合成。-Verilog prepared by the simple key debounce module. Mainly synthesized by a combination of level examination module and module 10ms delay
key_debounce-source-code
- 这是fpga按键消抖的源代码，在很多fpga按键实验中都可以用到，能够进行代码移植。-This is the source code of the FPGA buttons, in many FPGA key experiments can be used, and can carry out code.
Display
- CPLD按键消抖控制,数码管显示。已调试通过。可直接使用-CPLD key consumer shake control, digital tube display. Debug through. Can be used directly
ex2_key
- 该实验需要实现一个简单的三个按键分别控制三个发光二极管亮或暗的控制。 例如， 按键 1 控制发光二极管 1。 上电初始发光二极管 1 不亮， 当检测到按键 1 被按下后， 发光二极管 1 则点亮， 按键 1 再次被按下时，发光二极管 1 则不亮，如此反复。 该实验需要把握好按键消抖检测的设计技巧。 -The experiment needs to implement a simple three buttons control the three LEDs light or dark contr
class09_A
- Verilog 状态机编写按键消抖，并且testbench-Verilog write key debounce
key_filter
- 用于FPGA的按键消抖的Verilog文件，经过modelsim仿真和下板验证。-Verilog file for FPGA key debounce, after modelsim simulation and verification under the plate.
CPU_Project_board
- CPU 5级流水线实现（加hazard处理与板级验证，板级验证带有按键消抖）-5-stage pipelined CPU (plus hazard dealing with board-level verification, board-level verification with key debounce)
del_skew
- 按键消抖的verilog代码，在fpga开发板上可用，有按键功能的设计如果不消除抖动，可能会造成误触发-a cut key skew verilog code ,it can work on fpga card,key cut skew is very importent,the design may have error without the code.
debounce
- 按键消抖是fpga学习 乃至编程语言学习的重要之重 我自己用的一个消抖程序真的很棒 希望对你有用 -Key jitter is an important FPGA learning and even programming language learning important to my own use of a shake out process is really great to be useful to you
sp6ex6
- 按键消抖与LED开关实例，5个导航按键的按下与 否，对应控制LED D2/D3/D4/D5/D6的亮灭切换-Key debounce switch with LED example, 5 navigation keys and press No, the corresponding LED control D2/D3/D4/D5/D6 light off switch
wave
- 通过扫表输出多种波形，按键控制波形频率幅度以及种类,按键消抖有待完善-a kind of wave output, could be controled by four bottom
Desktop
- 改程序是数字钟的源文件，可以实现整点报时和可调时的功能，并且消除了按键消抖。-Reform program is a digital clock source file, you can bring the whole point timekeeping function and adjustable time and eliminate the key debounce.
Verilog_ex2
- 基于FPGA实验板的按键消抖实验，实验板选用DE1-Based on the FPGA experiment board keys away shaking
prj_button_anti_shake
- 按键消抖的fpga程序，code is based on verilog language, it is practical, we hope to help
keyscanverilog
- 按键消抖程序，通过FPGA实现.验证通过-Key debounce program by FPGA. Verification by