搜索资源列表
SDCardreadwrite
- 一个SD卡读写程序 硬件平台:atmega8L 最小系统 硬spi(sd 卡的初始化采用了io 口模拟时序,因为在实验中发现要使 用较低的速率才能稳定的初始化) 软件开发平台:ICC-AVR version 6.31a 硬件配置:atmega8L 内部8m 时钟 sandisk 128m sd 卡-an SD Card Reader procedures hardware platforms : atmega8L minimum system hardware spi (
report_of_sd_mmc_reader1
- 51单片机读写SD_MMC卡设计报告--本文件介绍了在51平台通过SPI方式读写SD/MMC卡,包括软硬件需求, SD/MMC硬件连接, SPI接口软件模拟,SD/MMC上电初始化,写单块,读单块,写多块,读多块,块擦除,上位串口通讯协议,PC上位软件操作说明等。
SD_1602
- Keil C51对应51系列DIP40单片机,读SD卡初始化,并显示1602屏-Keil C51 corresponds to 51 DIP40 microcontroller, reading SD card initialization and displays the screen 1602
SD
- 基于硬件SPI模式的SD卡驱动程序,包括SD卡初始化,发送和就收命令,数据块读和写等-Hardware-based SPI mode of SD card driver, including the SD card initialization, to send and to receive commands, read and write data blocks, etc.
vivi-sd
- VIVI是2410的ARM9芯片的BOOTLOADER(用于启动和初始化芯片)-VIVI is 2410 ARM9 chip BOOTLOADER (used to start and initialize the chip)
shiyongshouce
- 处理器:C8051F340 TFT控制器:SSD1963 USB接口 SD卡接口 TFT LCD接口 支持触摸屏测试 支持最大分辨率:864(RGB)*480 Dots 此开发板支持SD卡读写,读写方式采用C8051自带的SPI,速度可高达(25Mb/S);支持USB驱动,通过PC端软件,可直接将需要现实的图片数据下载到SD卡中;赠送底
sd
- SD卡调试已成功,上传我的经验 调试关键点: 上电时要延时足够长的时间给SD卡一个准备过程,在我的程序里是5秒,根据不同的卡设置不同的延时时间。SD卡初始化第一步在发送CMD命令之前,在片选有效的情-SD card commissioning has been successfully uploaded my experience debugging the key point: the power to delay long enough time to the process of pr
XS128microSDV3.0
- s12单片机SD初始化设定,建议初学者学习-s12 MCU SCI initial setting is recommended for beginners
SD
- SD卡驱动程序,SPI模式,定义初始化、读容量、读单块等操作,容量小于2G的SDSC适用。-SD drv,SPI mode,Init,ReadSingleBlock defined,2G SDSC applied.
SD-znFAT--exmple1
- 程序说明:此程序首先进行文件系统初始化,然后获取总容量与剩余容量,51单片机的znFAT文件系统,支持SD卡上的。-51 znFAT
linux--SD
- 基于linux的SD卡驱动,初始化寄存器,支持热插拔,自动读取数据等功能-linux SD
sd
- 这个是kinetis k60的sd卡初始化程序 包含有fat32文件系统 管理目录等功能-This is the sd card kinetis k60 initialization routine fat32 file system management directory
SD-Card
- SD卡源程序代码包括其初始化以及读写程序-SD card initialization and read-write program code
STM32--SD-RW
- 开机先初始化SD卡,如果SD卡初始化完成,则读取扇区0的数据,然后通过串口打印-Boot initializes the SD card, if the SD card initialization is complete, the read sector 0 of the data, and then print through the serial port
SD-CARD
- 关于SD卡的内部结构,寄存器操作的资料,用于单片机操作SD时参考查阅,包括初始化和读写的详细流程。-Internal structure on the SD card, the data register operation, when used in single-chip operation SD reference works, including detailed process initialization and read-write.
sd-card与stm32 spi通信
- sd-card与stm32 spi通信,功能描述:STM32f103 SPI接口配置的初始化函数,隶属模块:STM32 SPI操作
SD
- sd卡的初始化,读数据操作,写数据操作,文件系统设置-sd card s initialization ,read data,write data and file system
sd
- 实现SD卡初始化以及读相关操作,包括项层、读模块和初始化模块- SD card to achieve read and write operations
SD
- SD卡存储删除操作,新建文件,FAT32系统,初始化-SD card operation
sd_test
- 基于FPGA的SD卡初始化、读写,实现向FPGA写入数据并读取(SD card initialization, reading and writing, with FPGA based)