搜索资源列表
RCC
- 核查的关键在于对核材料属性准确、有效地识别[1][2]。利用252Cf作为随机脉冲中子源,对其入射核材料所产生的诱发裂变中子脉冲信号进行采集、处理和分析,得到自相关、互相关、自/互功率谱、功率谱密度比等一系列参数,从而反演核材料内部的反应性的情况,便可用于分析和识别核材料,其基本原理就是252Cf中子源驱动噪声分析测量法[-The result shows that the trained Elman neural network is able to identify the characte
LFM_radar
- 实现线性调频脉冲压缩以及高斯噪声条件下的匹配滤波-LFM radar and its corresponding matched filtering.
qpsk
- qpsk调制解调 脉冲成型 信道噪声 抽样 检波-qpsk modem pulse shaping
ofs003
- 为了了解单脉冲散射信号的噪声特性和简单编码脉冲的噪声特性。-In order to understand the noise characteristics of the scattering signal noise characteristics of single-pulse coded pulses and simple.
zhongzhilvbo
- 中值滤波器VI对混有高斯白噪声的脉冲信号进行滤波-Median filter VI for mixed Gaussian white noise pulse signal filtering
ISM
- 产生房间脉冲响应的源代码,在多噪声,多混响的情况下,信噪比很低,信干比也很低,同时伴随着噪声是非平稳的情况。-room impluse response
smartnoise_rectangle
- 用matlab仿真的灵巧噪声干扰,噪声干扰形式为线性调频信号卷积矩形脉冲串。-Smart noise simulation using matlab, noise in the form of a rectangular convolution chirp signal bursts.
levinson
- 图1为均衡带限信号所引起失真的横向或格型自适应均衡器(其中横向FIR系统长M=11), 系统输入是取值为±1的随机序列,其均值为零;参考信号;信道具有脉冲响应: 式中用来控制信道的幅度失真(W = 2~4, 如取W = 2.9,3.1,3.3,3.5等),且信道受到均值为零、方差(相当于信噪比为30dB)的高斯白噪声的干扰。试比较基于下列几种算法的自适应均衡器在不同信道失真、不同噪声干扰下的收敛情况(对应于每一种情况,在同一坐标下画出其学习曲线): 1)横向/格-梯型结构LMS算法
Yan_Yi_4PAM
- 仿真4-PAM(脉冲幅度调制)载波调制信号在AWGN(加性高斯白噪声AWGN(Additive White Gaussian Noise))信道下的误码率和误比特率性能,并与理论值相比较。-Simulation 4-PAM (pulse amplitude modulation) modulation signal in AWGN (additive white Gaussian noise AWGN (Additive White Gaussian Noise)) under the chan
Yan_Yi_8PAM
- 仿真8-PAM(脉冲幅度调制)载波调制信号在AWGN(加性高斯白噪声AWGN(Additive White Gaussian Noise))信道下的误码率和误比特率性能,并与理论值相比较。-Simulation 8-PAM (pulse amplitude modulation) modulation signal in AWGN (additive white Gaussian noise AWGN (Additive White Gaussian Noise)) under the chan
project
- 对双极性随机序列二进制数字基带信号,采用开方升余弦滚降波形、矩形脉冲、半波正弦在白噪声条件下的最优(匹配滤波器)接收程序。考察码间串扰和白噪声共同作用引发的误码,画出误码率曲线;设计均衡器画出误码率曲线。-Bipolar random sequence of binary digital baseband signal, using the square root raised cosine wave, rectangular pulse, half sine wave white noise
Labwindows_CVI-Signal-Processing
- LabWindows_CVI作为一个用于建立自动测试系统的理想软件开发系统,提供了大量用于信号分析处理的函数,满足工程人员的需要。 信号产生实例工程“signal generation.prj”,LabWindows_CVI产生冲击信号、脉冲信号、斜坡信号、正旋信号、噪声信号、三角波信号等,在Graph控件中显示波形。 信号时域分析工程“timedomainanalysis.prj”,介绍了LabWindows_CVI信号的叠加、相关分析及卷积三种常用时域信号处理方式,将处理结果在Gra
dsp_rader
- 产生信号加噪声,并且把它MTI,MTD,脉冲压缩。-Generating a signal plus noise, and put it MTI, MTD, pulse compression.
meidian-filter(CPP)
- 中值滤波是对一个滑动窗口内的诸像素灰度值排序,用其中值代替窗口中心象素的原来灰度值,它是一种非线性的图像平滑法,它对脉冲干扰级椒盐噪声的抑制效果好,在抑制随机噪声的同时能有效保护边缘少受模糊。-Median filtering is the pixel on a sliding window in the value ordering, the original gray instead of window center pixel values by which value, it is a
lpc_vocoder_rev2
- 这个MATLAB构建一个锻炼LPC声码器,即,执行LPC分析和合成语音文件,导致合成语音近似原始的演讲。LPC分析使用一个标准的自相关分析来确定LPC系数的设置,一帧一帧的基础上,以及框架获得。一个独立的分析方法(cepstral螺距内检测器)把每一帧的言论是要么表示演讲(时间由cepstral峰值的位置在指定范围的音调时期)或无声的言论(模拟随机噪声帧)0帧基音周期的样本。独立的分析提供了一个两国并存的激发函数LPC合成处理的一部分,包括一系列的脉冲(表示帧期间)和/或噪声序列(在无声的帧)。
BPSKpinlv
- 二相编码雷达脉冲雷达信号的参数提取。在二相编码雷达脉冲信号上加入噪声,然后在提取改信号的频率-Second phase coding parameter extraction radar pulse radar signals. Join noise in the two-phase encoded radar pulses, and then change the frequency of the signal extraction
erxiangbianmacanshutiqu
- 对加入噪声后的二相编码雷达脉冲信号进行一系处理,提取其信号的参数。-After joining the noise of the two-phase coding signals a series of radar pulses are processed to extract the parameters of their signals.
LFMpinlv
- 对加入噪声的线性调频雷达脉冲信号进行处理,提取该信号的频率。-For added noise chirp radar pulse signals are processed to extract the frequency of the signal.
disturb
- 分别在不含有含有高斯白噪声下的系统辨识程序,输入信号为脉冲输入。-Respectively, does not contain containing Gaussian white noise under the system identification procedures, the input signal is a pulse input.
pxyyeghi
- LDPC码的完整的编译码,搭建OFDM通信系统的框架,FIR 底通和带通滤波器和IIR 底通和带通滤波器,采用的是脉冲对消法,添加噪声处理,多目标跟踪的粒子滤波器。-Complete codec LDPC code, Build a framework OFDM communication system, Bottom-pass and band-pass FIR and IIR filter bottom pass and band-pass filter, It uses a pulse o