搜索资源列表
DE2_70_LTM_CCD.zip
- A design on a DE270 FPGA with the use of CCD: a camera DC2 and a TRDB LTM after reading from the SRAM. ,A design on a DE270 FPGA with the use of CCD: a camera DC2 and a TRDB LTM after reading from the SRAM.
DE2_CCD_PIP
- 实现DE2上的摄像头采集,实现画中画,利用两个摄像头,在VGA上实现两个画面同时出现-DE2 on the camera to achieve the collection, to achieve PIP, using two cameras, the VGA screen to achieve two concurrent
saa7113
- ccd摄像头模拟信号转换为数字信号 芯片 配置sa7113-ccd camera convert analog signals into digital signals chip configuration sa7113
vga_focus_code
- 用VHDL编写的PAL转换为VGA格式的源代码,同时包括摄像头的自动变焦控制源码-PAL prepared using VHDL VGA format is converted to the source code, including the automatic zoom camera control source
DE2_CCD
- CCD的驱动程序,用于DE2板,可显示出摄像头采集的图像数据。-CCD driver for the DE2 board, show the camera s image data collection.
Fifo
- 一个FIFO源代码,基于Altera FPGA-A FIFO source code, based on Altera FPGA
program-example-code
- mini2440非操作系統下的測試源碼,包括對板上所有硬體,介面,記憶體...的測試源碼.例cmos攝像頭等,都包含在內.-mini2440 test under non-operating system source code, including all on-board hardware, interface, memory test source .... Example cmos camera in first class, are included.
camera_up
- Camera Interface模块是视频输入转换存储模块。该模块一端接通用的video camera设备,另一端接AHB总线。实现了将Camera捕捉到的数据进行转换、并通过DMA存储到memory中。该IP支持ITU-R BT 601/656 8-bit 模式。支持YCbCr, RGB格式输入。可以将camera产生的YCbCr信号转换成24bit RGB 信号,然后下采样生成16bit RGB 5:6:5的LCD能直接读取显示的数据。该设备支持图像的镜像和翻转,以便适应手持式设备在移动环境
I2C
- 实现基于Avalon总线架构的I2C控制器!可实现OV7620等数字摄像头的配置功能!-The I2C controller based on Avalon bus architecture! OV7620 can be achieved, such as the configuration of digital camera features!
sc_camera_01APR08
- 基于FPGA的CMOS 传感器的图像传输处理.整个设计还基于NIOS.-FPGA-based CMOS sensor Image Transmission. The design is also based on NIOS.
DE2_TV
- 友晶公司DE2开发板的TV示例完整源代码 FPGA Cyclone-Friends of the crystal of TV company DE2 development board complete source code for FPGA CycloneII sample
DE2_LCM_CCD
- DE2开发板上用DC2模块和LCM模块实现的数字照相机源代码-DE2 development board with the module and the LCM module DC2 Digital Camera Source
CCD
- 本设计主要用来进行图像采集处理,通过摄像头采集图像信息,经过插值算法后存储到外部SDRAM,然后读取图像数据,进行边缘滤波处理后经VGA输出到屏幕上。-This design is mainly used for image acquisition and processing,through the camera capture image information,after interpolation to the external memory after the SDRAM,and th
CameraLink-source-code
- 基于FPGA的多路CameraLink数据的发送和接收程序源码-FPGA-based multi-CameraLink data sent and received program source code
I2C_slave_module
- 实现IIC从的VHDL代码,实现外部摄像头的数据交互和控制-Achieve the IIC from the VHDL code that implements the external camera data exchange and control
VmodCAM_Ref_VGA_Split
- FPGA实现摄像头控制,VHDL语言,HDMI模块-FPGA implementation camera control, VHDL language, HDMI module
DE2_70_D5M1
- fpga,vhdl,de2-70,数字摄像头-fpga, vhdl, de2-70, a digital camera
ov7670_capture
- ov7670摄像头捕获代码,VHDL,稍加修改即可完成OV系列其他摄像头的捕获操作-ov7670 camera to capture the code, VHDL, slightly modified to complete the OV series of other camera capture operation
Zedboard_Camera_PCB
- camera and zedboard, vga
VmodCAM_Ref_HD Demo_13
- This project has dependencies in the 'digilent' VHDL library. For your convenience a local copy of these dependencies are included in the remote_sources directory. The VmodCAM_Ref_HD demo project was built around an Atlys+VmodCAM setup. The proj