搜索资源列表
51单片机example_ellcerent
- 51单片机众多优秀的开发源程序:ZLG7290例程*ZLG7290汇编例程*蜂鸣器音乐例程*蜂鸣器响例程*读EEPROM并显示例程*16×2LCD模块例程*128×64点阵LCD模块例程*直连KEY和LED例程*直连LED例程*lin模块的原码及例程。LIN总线例程 RS232例程(包括PC端和书上了串口例程) USB1.1例程(包括PC端) RS485例程 USB2.0例程(有3个,包括PC端) 基于ETHERNET的TCPIP例程 时钟显示例程 CAN自发自收例程 外中断1 CAN例程 US
avr+cp2200_source
- m16+cp2200组成的网络接口。 m16使用内部RC振荡8M,如果要提高主频,请注意修改模拟总线读函数。 cp2200模块使用www.icdev.com.cn的,更改pin44连接VCC,即总线复用方式,地址数据复用。 软件编写使用avrstudio4.12+sp4+winavr(avrstudio自带的winavr嵌入方式)。 硬件连接: m16 | cp2200 PORTA | AD0-7 PB0 | RST PB1 | CS PB2 | RD P
Ethernet
- 模拟Ethernet帧的发送过程 编写程序模拟Ethernet结点的数据发送流程。 具体要求: 1)用两个线程a和b来模拟Ethernet上的两台主机。 2)用一个双字类型变量Bus来模拟总线(将其初始化为“\\0”,并且总线等于“\\0”时表示总线空闲)。 3)两个子线程向总线发送自己的数据。数据用该线程的线程号进行模拟,发送数据用线程号和Bus的“或”操作进行模拟(即Bus=Bus|ID,ID为该线程的线程号)。 4)每台主机须向总线上成功发送10次数据,如果其中某次
交换网络嗅探
- 共享以太网:在共享网络环境中,所有的主机都连接到同一条总线并且与其他的主机竞争带宽。这意味着在这样的环境中,发给某个主机的数据包也会被其它所有的机器收到。因此在这样的环境中,任何设置成混杂模式的主机,将可以捕获发送给其它主机的数据包,从而窃听网络上的所有通信。 -Ethernet sharing : sharing network environment, all of the hosts connected to a bus with other mainframe competition b
目前以太网PHY芯片是通过总线MDC/MDIO
- 目前以太网PHY芯片是通过总线MDC/MDIO,但是基本上是通过MAC芯片直接管理的,本代码实现了通过FPGA管理PHY。即由FPGA完成MII管理,At present, Ethernet PHY chip through the bus MDC/MDIO, but basically through the direct management of MAC chip, the code through the FPGA implementation management PHY. FPGA
I2C.rar
- I2C 总线C语言集锦包括,PIC单片机,51单片机,AVR单片机.,I2C Bus C language allehanda including, PIC microcontroller, 51 MCU, AVR Singlechip.
can-utils.tar.gz
- linux下测试CAN总线的应用程序,编程框架与网络socket编程类似。,This is the CAN bus test program in linux. The framwork is just like ethernet socket.
TCP_IP_C
- 通过单片机实现TCP/IP,ENC28J60是一款专门为单片机应用而设计的以太网控制芯片,一共28个引脚,通过SPI总线与单片机芯片连接,占用口线少,速度也比较快,对于软件开发而言,简化了设计工程师的设计难度-Through the MCU TCP/IP, ENC28J60 is a single-chip applications specifically designed for the Ethernet controller chip, a total of 28 pins, the SP
TCP-IP
- PIC单片机网络编程的源代码,使用了EN28J60以太网控制器,非常适合远程控制场合,ENC28J60是一款专门为单片机应用而设计的以太网控制芯片,一共28个引脚,通过SPI总线与单片机芯片连接,占用口线少,速度也比较快,对于软件开发而言,MicroChip提供了免费的TCP/IP协议栈,大大方便了软件工程师的开发工作。-PIC microcontroller network programming source code, use the EN28J60 Ethernet controller
FPGA_VHDL_code
- FPGA学习非常珍贵的资料,包括USB、UART、I2C、Ethernet、VGA、CAN等总线的VHDL实现,可以直接应用于实际项目中。需要的请下载。 -FPGA to learn very valuable information, including USB, UART, I2C, Ethernet, VGA, CAN bus, such as VHDL to achieve, can be directly applied to actual projects. Need to do
232network
- 大家见过以太网、总线网、无线网,但是很少接过232组网吧,送上一个参考方案。-We have seen Ethernet, bus network, wireless network, but few Internet cafes take over 232 groups, sent a reference program.
zlg_avalon_rtl8019
- 周立功公司rtl8091IP核,接avalon总线,可实现以太网通信,有详细的说明-ZLG' s rtl8091IP nuclear, then avalon bus, Ethernet communications can be realized, a detailed descr iption of
Ethernet
- 实验要求: (1)用两个线程a和b来模拟Etherneth上的两台主机。 (2)用一个双字类型变量Bus来模拟总线(将其初始化为“\O”,并且总线等于“\O”时表示总线空闲)。-Experimental requirements: (1) with two threads a and b to simulate Etherneth on the two hosts. (2) with a two-word type variable Bus to simulate the bus (ca
EtherBus
- ethernet bus source code with c++ useable in network simulation
Ethernet
- 模拟Ethernet帧的发送过程 编写程序模拟Ethernet结点的数据发送流程。 1) 用两个线程a和b来模拟Ethernet上的两台主机。 2) 用一个双字类型变量Bus来模拟总线(将其初始化为“\0”,并且总线等于“\0”时表示总线空闲)。 3) 两个子线程向总线发送自己的数据。数据用该线程的线程号进行模拟,发送数据用线程号和Bus的“或”操作进行模拟(即Bus=Bus|ID,ID为该线程的线程号)。 4) 每台主机须向总线上成功发送10次数据,如果其中某次数据发送失败
CAN-bus
- CAN编程接口说明 CANbus以太网交换机(SNode)指南 CANbus转串口(TNode-Mix)指南 CAN编程接口说明v3 CANbus转以太网(双路TNode-N2)指南-CAN programming interface CANbus Ethernet switch ( SNode ) guide CANbus to serial port (TNode-Mix ) guide to the CAN programming interface V3 CANbus Ethernet
Digital-Bus-Switch-Selection-Guide-scdb006a
- Brush Electronics Ethernet Bootloaders have been Digital Bus Switch Selection Guide scdb006a
can2net
- can总线转pc以太网的一个控制程序,实现对工业can总线上的抓包-pc Ethernet bus can turn a control program, to achieve the industry can capture bus
lab19-RTL8019
- YXDSP28335 以太网总线数据传输代码-YXDSP28335 Ethernet bus data transmission code
20170722
- 倍福PLC连接4台松下Ethercat总线伺服,2轴电子齿轮同步,通过Ethernet/IP连接基恩士扫码枪。(The PLC is connected to 4 Panasonic Ethercat bus servomotor, the 2 axis electronic gear synchronously, and the Kean scan code gun is connected through Ethernet/IP.)