搜索资源列表
sngks32cTimer
- vxworks 中启动时配置运行时钟的代码-VxWorks which started the clock running when the configuration code
sngks32cSio
- vxworks bsp 中启动时配置串口的代码-initiation Configuration serial code
sysEnd
- vxworks bsp 中配置网络驱动的代码-configure network driver code
sysTffs
- vxworks bsp 中配置tffs文件系统的代码-VxWorks BSP TFFS Configuration File System code
7113_set
- philips saa7113寄存器配置-Philips saa7113 Register Configuration
Mega8fuse
- 正确的配置atmega8单片机的熔丝位的方法-correct configuration atmega8 SCM Fuse-way
enbeddedlinux
- 本文主要介绍了几种剪裁linux核心的方法，可以用于嵌入式系统，嵌入式服务器的核心配置。-This paper introduces some tailoring Linux core, which can be used embedded systems, the core embedded server configuration.
4510_bsp
- vxworks for arm9板的BSP配置文件,需要根据具体板配置进行修改-arm9 plate for VxWorks BSP configuration file, according to the concrete plate configuration changes
PIC18F4550_USB_firmware
- Microchip公司PIC18F4550芯片的USB firmware代码，我在压缩包中添加了jpg格式的硬件连接原理图和MPLAB IDE下的config bits配置图，希望对大家有用。-Microchip PIC18F4550 chip USB firmware code, I compressed add the jpg format connectivity hardware schematics and MPLAB IDE config bits of maps, useful f
Func_f2812
- 2812配置的初始化程序，已经通过实际产品的测试并应用。-2812 allocation of initialization procedures, the actual product has passed the test and application.
DSP28_ECan
- 2812模块配置的初始化程序，已经通过实际产品的测试并应用。-2812 configuration module initialization procedure, the actual product has passed the test and application.
LPC2292_boot
- Lpc2292的启动代码，进行启动设置、堆栈设置和外部总线配置-Lpc2292 the boot code, start the setup, setup and stack external bus configuration
generic_fifos
- 用HDL语言编写的通用fifo源码，通过对fifo的宽度和深度进行配置，可以产生我们所需要的fifo，还包括fifo的测试程序和仿真Makefile脚本-with HDL prepared by the General fifo source, fifo of the breadth and depth configuration, can produce what we need fifo. also included fifo testing procedures and simulatio
EDMA_nbperph
- DSP6713 MCBSP EDMA传输配置-DSP6713 MCBSP EDMA transmission configuration
E5122
- 对家庭控制系统的方案、组成、硬件配置、软件设计、工作原理、功能以及技术性能进行了论述。给出了通过单片机进行数据采集，并通过网络协议处理器将数据打包成以太网协议包发送到以太网上，从而实现基于以太网的远程控制方案-family control system, component, hardware configuration, software design, working principle, the functional and technical performance of the exp
kyyi+BIOS6
- 经典s3c44b0xBios引导程序代码内含详细说明 烧写步骤 1> 开发板上电 2> 执行Debug目录下的F.bat文件将bios程序烧写到flash中 3> 将PC配置为192.168.111网段 4> 用交叉网线连接开发板和PC 5> 运行串口监视软件,波特率115200 6> 开发板复位 -classic s3c44b0xBios guide code contains detailed steps 1gt
2148USB_Mem
- 将LPC2148通过自带的USB口配置为USB存储设备.-to LPC2148 through onboard USB port configured to USB storage devices.
nRF905peizhi
- nRF905芯片的寄存器配置C程序，使用S51单片机-nRF905 register configuration C, the use of S51 MCU
McBSP_EDMA
- 把Ti C6711 DSP上的McBSP配置成串口模式，通过EDMA通道以中断方式传给CPU作处理。-Ti put on the C6711 DSP McBSP Serial configured model, through EDMA access pass to interrupt the CPU for processing.
pmc3386
- 程序是一个vxworks下对PMC公司3386千兆MAC芯片的驱动和配置-procedures under VxWorks is a company right PMC 3386 Gigabit MAC chip-driven and configuration