搜索资源列表
MS5611
- MS5611是一种精度较高的气压计，用于测量高度和温度，先配置，后利用定时器定时读取传感器的数据，并解算出高度-MS5611 is a high precision barometer for measuring altitude and temperature, the first configuration, after the use of timers regularly reads the sensor data, and solves for height
0304-i2cPP
- stm32单片机驱动MPU6050和气压计MS5611传感器，并使用12864显示，数值显示正常，接线简单。-stm32 SCM drive MPU6050 and barometer MS5611 sensors, and use 12864, numerical display normal, simple wiring.
STM32_MS5611
- STM32测试气压计MS5611的代码，通过串口回传气压数据。基于KEIL软件。-STM32 barometer MS5611 test code, return air pressure data via the serial port.
Arduino-0.22-MS561101BAOK
- 基于Arduino对气压传感器MS5611的(精密修正)数据采集-Arduino based on MS5611 pressure sensor (precision correction) data acquisition
ANO-four-rotors
- 国内目前做的比较好的匿名四轴的源码和上位机的程序，微型四轴，使用的是STM32F103C8T6芯片，传感器使用了MPU6050和MS5611，没有使用DMP算法，而是自己写了四元数程序，数据处理很有参考价值。-China is currently doing better anonymous source axis and PC programs, micro-axis, using a STM32F103C8T6 chips, sensors used MPU6050 and MS5611,
four-rotor-aircraft-flight
- 基于STM32F407的四旋翼飞行器的C语言源码和上位机软件，其中加速度计陀螺选择MPU6050，气压计选择MS5611，电子罗盘选择AK8975。-The C source code and the upper computer software of the four-rotor aircraft flight based on STM32F407, which using MPU6050 as accelerometer and gyroscope, using MS5611 as ba
MS5611-SPI
- 一个使用SPI模式读取MS5611气压值和温度值的程序。使用C8051F330单片机。-A program for MS5611 to read Pressure and temperature with SPI channel by C8051F330 microchip。
Baroceptor
- bmp180 ms5611气压传感器驱动程序-bmp180 ms5611 pressure sensor driver
10.-MS5611
- MS5611的程序，基于stm32.把自己项目里面的例程都放出来了，给有用的人。-IMU program
MS5611
- 自己用了一天时间调出来的 气压计程序可一用在飞机上
ms5611Poled1306ssd-0.96
- 用51作为主机。ms5611气压传感器测量气压及温度并转化为高度，将数据用oled显示。包括软件模拟IIC及硬件SPI通讯方式。-With 51 as the host. Ms5611 barometric pressure sensor to measure air pressure and temperature and into a high degree, the data with oled display. Including software analog IIC and hard
MSP430_IIc_MS5611
- msp430f149单片机用IIC协议驱动MS5611传感器，-msp430f149 MS5611
气压显示
- 实现了气压读出及显示在OLED上，接收GPS的速度时间及海拔显示在OLED屏幕上。(The air pressure is read out and displayed on the OLED, and the speed, time and altitude of the receiving GPS are displayed on the OLED screen.)
滑动滤波GY_86
- 使用stm32f4读取GY_86数据。底层驱动为IIC，方便移植，并且使用滑动滤波，数据稳定可靠(Using stm32f4 to read GY_86 data. The bottom drive is IIC, which is easy to transplant, and uses sliding filter to make the data stable and reliable)
MS5611 LCD显示 串口输出原始数据
- STM32驱动MS5611读取温度气压值，并在LCD屏显示。(STM32 drive MS5611 to read temperature, air pressure, and display in the LCD screen.)
51_IO_I2C
- 使用51单片机IO口模拟I2C总线接口，实现与MS5611的通信(The use of 51 single-chip IO port analog I2C bus interface to achieve communication with the MS5611)
Stm32F407_Template_iar
- STM32F407的气压传感器MS5611控制程序(STM32F407's air pressure sensor MS5611 control program)
ms5611
- 气压计Ms5611的驱动，用的是IIC获取MS5611的数据(The driving of the barometer Ms5611)
MS5611
- 基于STM32 IIC总线读取气压高度数字