搜索资源列表
Micrium+GUI
- 把uCOS移植到三星的44B0的CPU上面,不过是在IAR环境下的,代码是2.80的,还带uCGUI哦,用IAR for ARM 4.31和H-JTAG验证通过。个人认为可以媲美官方版本的移植。-put uCOS transplanted to the 44B0 Samsung CPU above, but in the IAR environment, the code is 2.80, also brings uCGUI Oh, IAR used for the ARM 4.31 and H
spidmadriver
- 本驱动程序在linux2.6.17中测试通过。yangxing msn:lelma_yx@hotmail.com 希望对SPI操作的朋友有所帮助。 一、工作方式: 从设备:SPI为MASTER模式 S3C2410:SPI为SLAVE模式+DMA 二、工作流程 1.S3C2410从接收:当从设备发送数据时,S3C2410利用DMA方式收数,收到指定长度的数据,则进入DMA中断,将接收的数据拷出。 2.S3C2410从发送:当S3C2410需要发送,首先由RTS请求
uCOSIIinLPC210X
- 关于 uC/OS-II 在 LPC210X 上移植的说明 1. 全部代码在 ADS1.2 中编译调试. 2. 您可以更改 RO BASE 为 0x0000 0000, 这样可以将代码写入 flash 中运行. 5. 全部代码采用 ARM 指令. 6. uC/OS-II 版本为 V2.52. 7. 当您暂停程序的时候, 如果定时器开着, 那么定时器并不会暂停,需要注意 8. Vectors.S 文件中的 startup 段为程序入口. 9. 编译时下面的警告不必理会.
t264OVERx255
- 1.实现H.264开源代码T264在X255系统上的T264解码+time+LCD Display. 2.解码100帧的foreman.qcif消耗时间10620ms,对部分的C程序(如idct4x4,iquant4x4等)进行ARM指令优化 3.将T264转化为C程序,适用于linux/window(VC6&VC71),并且实现Mx1的移植(Linux系统)-1. H.264 achieve revenue code T264 X255 system in the T264 decod
Hjita
- 寄予KEIL for ARM 2.5的\\H—jita例程.-placed KEIL for ARM 2.5 \\ H-jita routines.
nboot
- 由三星的2442修改而来,正确引导eboot,请注意用三星公版的硬件配置,具体可以参考QQ2440,因为我在些平台上跑过,具体操作 1.target settings : post-linker:选择为 ARM fromELF 2.ARM assembler与 ARM c Compiler 的 architecture or processor 选择为:ARM920T 3.ARM linker的 output:RO base为 0x00000000 (当仿真时为:0x30000000
H-JTAGV0.4.2
- 一个很好的FLASH PROGARMER 在线下载工具支持很多FLASH 及主要的ARM
arm-download-98665.rar
- The OpenMAX DL (Development Layer) APIs contain a comprehensive set of audio, video, signal processing function primitives which can be implemented and optimized on various CPUs and hardware engines and then used for accelerated codec functionality.
uCOS-II
- 掌握在uC/OS-II 操作系统下使用ZLG/GUI的基本方法。 1. 启动 ADS 1.2,使用 ARM Executable Image for UCOSII(for lpc22xx)工程模板建立一 个工程 gui_ucos,工程存储在 uCOS-II 目录下。 说明:在 uCOS-II 目录下要保存有 uCOS-II 的移植代码和内核源代码。 2. 建立 C 源文件 Test .c,编写实验程序,保存到 gui_ucos\src 目录下,然后添加到工程 的 use
COMMON
- ARM部分实例包括ADS1.2工程和IAR4.40工程两部分。 请将examples文件夹复制到硬盘根目录下,按照书中的工程配置重新进行配置。 对于ADS工程,如有必要需删除工程中的源文件重新添加。 对于IAR工程,需要注意*.xcl文件路径的设定。-ARM part ADS1.2 Examples include engineering and engineering IAR4.40 two parts. Please copy the examples folder to you
H-JTAG-V0.6.1
- The driver of H-JTAG is open and free for ARM debug, can support ADS 1.2
st7920
- 名称:ST7920字符驱动程序(ARM版) V1.0 作者:Transmart 中国传惠 gongxd@126.com 日期:2009-8-3 历史: 2009-8-3 V1.0 初始版本 环境: IDE-Version: uVision3 V3.63 Copyright (c) Keil Elektronik GmbH / Keil Software, Inc. 1995 - 2008 Tool Version Numbers:
H-JTAG_V0.7.0
- embedded arm jatg v7.-2 program files.
H-JTAG_V0.9.2
- embeded arm jtag v9.02 program.
H264CE(FFMPEG_ARM)
- ARM平台下的H.264编码和解码源代码,可以在ARM下使用,移植一下就可用! -ARM platform of H.264 encoding and decoding the source code, you can use ARM, transplantation can be used look!
GPS
- 基于ARM的GPRS车载系统源程序 /******************************************************************************* ** Function: Get GPS Communication Port from GPSPort.ini ** ** In: char buffer ** ** Out: set the char buffer ** ** Date: 2007-8-1 Autho
EasyJTAG-H
- EasyJTAG-H 仿真器是一款新的仿真器,目前,可以支持LPC2000 系列ARM7 微控制 器和部分ARM9 芯片,支持ADS1.2 集成开发环境,支持单步、全速及断点等调试功能,支持下载程序到片内FLASH和特定型号的片外FLASH,采用ARM公司提出的标准20 脚JTAG 仿真调试接口-EasyJTAG-H simulator is a new emulator, now supports LPC2000 family of ARM7 microcontrollers and
lpc2000-ARM
- lpc2000系列ARM上的移植源代码。 pc.c是移植于μCOS-II的PC服务代码-lpc2000 series of ARM transplant source code. is pc.c transplantation in μCOS-II PC Service Code (pc.c) main changes: 1,# include " includes.h" changed to " config.h" 2, displayed on the screen changed
OLIMEX-FTDI-drivers-2-12-04
- ARM - USB - TINY driver (Non-H version)
ffmpeg-4.2.3
- 1、下载ffmpeg-4.2.3代码 2、配置(编译静态库) ./configure --target-os=linux --prefix=$(pwd)/temp --enable-cross-compile --arch=arm --cc=arm-hisiv300-linux-gcc --cross-prefix=arm-hisiv300-linux- --nm=arm-hisiv300-linux-nm --disable-shared --enable-static --ena