搜索资源列表
SPI
- DSP的基于SPI-TLC5620的DA转换程序
关于DDS的相位变化的VHDL程序
- 关于DDS的相位变化的VHDL程序
c51源程序集合
- 源码 │ 0108_12864LCD-F149.ASM │ 12232-1520.c │ 12232.c │ 12864-ks0108.asm │ 12864-ST7290-F149.C │ 12864-zb.c │ 12887.c │ 24C01-64.C │ 24C01-F440.C │ 28sf040a.asm │ 51use.txt │ 6963.C │ 93c46.asm │ 93c46.c │ 93cxx.c │ ad7416-mcuzb.c │ ad7416.c │ AT24C01
sd_music
- 读SD卡用SST单片机与tlc5620播放音乐程序-Read SD card with SST SCM and play music tlc5620 procedures
ex5_SPI
- 程序所在目录:ex5_SPI D/A 转换芯片选用的是SPI 接口的TLC5620,串行4 通道8 位DA 转换。 打开CC2000,进行如下操作: 1.Project->Open ,打开该目录中的工程文件。 2.Project->Rebuild ALL,编译链接 3.File->Load Program 4.Debug->GO Main 5.Debug->RUN (快捷键F5) 用示波器可以看到DA_OUT1 接口输出三角波
DA_TLC5620
- 基于verilog hdl 的DA_TLC5620实现源码-Verilog hdl based on the realization of the source DA_TLC5620
tlc5620moni
- 用msp430模拟tlc5620控制时序产生锯齿波-Msp430 simulation with timing control tlc5620 have sawtooth
DA_TLC5620_SIN
- 基于8051单片机 利用AD TLC5620 产生正弦波-8051 based on the use of AD TLC5620 generated sine wave
DACexperiments
- 该实验程序使用TLC5620中A、B、C、D四个通道分别输出周期、幅度相等的锯齿波,频率为6.35Hz-The experimental program using the TLC5620 in the A, B, C, D respectively, four-channel output cycle, equal amplitude sawtooth frequency of 6.35Hz
DSP-SPI
- DSP SPI接口的D/A例程,D/A转换芯片选用的是SPI接口的TLC5620,串行4通道8位-DSP SPI interface of the D/A routine, D/A converter chip, the choices are the SPI interface TLC5620, Serial 4-channel 8-bit
main
- 采用新一代超强抗干扰/强抗静电/高速/低功耗单片STC11F32XE为数据处理和控制的路灯照明智能系统。该单片机实现了对路灯的亮灭控制、报警、还有定时功能。通过A/D转换TLV2543检测LED故障,D/A转换芯片TLC5620控制LED灯状态,利用光敏电阻原理和红外对管特性实现自动调节路灯开关状态。同时成功设计了恒流驱动电源电路,使LED正常稳定的工作,并完成了自动调节路灯驱动电源输出功率,基本上解决了LED灯不能工作在稳定电流的问题。-Interference by a new genera
DAC
- 用SST89驱动DAC TLC5620输出方波,该方波可通过示波器进行显示。-Using SST89 drive DAC TLC5620 output square wave, the square wave can be displayed by the oscilloscope.
ADDA
- 基于带4路输出的串行8位DA转换器TLC5620和12位逐次逼近性串行AD转换器TLC2543的转换程序-Based on the serial output with four 8-bit DA converters TLC5620 and 12-bit successive approximation AD converter TLC2543 serial conversion process
tlc5620_out_sin
- 用FPGA操纵TLC5620DA转换器,用VHDL语言编写,调试通过,并输出正弦波。-Manipulation TLC5620DA converter with FPGA using VHDL language, debugging through, and the output sine wave.
DA
- 00IC2407+CPLD板上选用的DA转换器是TI公司的TLC5620,TLC5620是串行4通道8位 DA 转换器,DSP 通过 SPI 与其接口,TLC5620 的工作频率是 1MHZ,所有 DSP 的 SPI也必须设置位1MHZ, -00IC2407+ CPLD DA converter board is selected TI' s TLC5620, TLC5620 is a serial 4-channel 8-bit DA converters, DSP and its
TLC5620
- The TLC5620C and TLC5620I are quadruple 8-bit voltage output digital-to-analog converters (DACs) with buffered reference inputs (high impedance). The DACs produce an output voltage that ranges between either one or two times the reference voltage
DF2C8_15_DAC
- D/A 驱动程序,数模转换DAC TLC5620 -The driver of D/A.
xhfasq
- 基于TLC5620和51单片机实现简单的信号发生器,可以调节方波,三角波的频率幅度,正弦波频率可调,幅度有两个档位。-51 MCU based TLC5620 and simple signal generator can adjust the square wave, triangle wave frequency range, adjustable sine wave frequency, amplitude has two stalls.
xinhao
- c51基于tlc5620的信号发生器,周立功实验上测试通过,内有dxp电路图,注释详细-c51 signal generator based on tlc5620, ZLG experiments on the test, there dxp schematic, detailed notes
tlc5620
- 模数转换的verilog描述,比较适合于初学者的学习-DA of Verilog