资源列表
TLV5618PADS7816PADS7841
- 此为12位AD7841.7816以及12位DA5618的驱动程序打包，可以大家一起学习一下，在AVR上调试通过的，我自己写的 可以用的-This 12-bit and 12 DA5618 AD7841.7816 driver package, everyone can learn about the AVR debugging through, and I write can be used
MAX232
- MAX232串口调试程序，实现了主机和从机之间的双向通信。程序已经测试，准确可行-MAX232 serial debugger, to achieve a master and slave between the two-way communication. Program has been tested, accurate and feasible
SPI1_Configuration
- STM32的SPI初始化的头文件，其中数据的发送和接收函数，发送完成后返回本次通讯读取的数据。-The head of the STM32 SPI initialization file, which data to send and receive functions, after sending this communication to read back the data.
jiaotongdeng
- 通过用80C51芯片写入程序，实现十字路*通灯通行功能，模拟路口处得红绿灯状态转换，达到保持车辆顺畅通行无阻，禁止路口处车辆阻塞，疏导交通的目的。-Written procedure by using 80C51 chip, to achieve common feature crossroads traffic lights, traffic lights simulated intersection was the state transition, to maintain the smo
dac0832-mega16
- AVR单片机Atmega16实现8位DA dac0832的数字电压输出，并且带protues仿真，易于理解。-8-bit AVR Microcontroller DA dac0832 Atmega16 achieve the digital voltage output, and with protues simulation, easy to understand.
FLASH-Flash-program
- 用于MSP430F149。FLASH存储器读、写、段擦除从程序存储器的两个数组内分别读出N_DATA个字节和字，写入信息存储器和FLASH中某 一段内，然后再将写入的内容读出到RAM中的数组中进行验证。-For MSP430F149. FLASH memory read, write, erase segments from within the program memory of the two arrays were read out N_DATA bytes and words, a
PWM--xunji
- 用LM3S811写的利用IO口产生PWM信号控制电机，并利用光电传感器采集黑白信息送给IO口，然后控制小车循迹-Written with LM3S811 PWM signal generated using the IO port to control the motor, and the use of photoelectric sensors collect information sent to the IO port black and white, and then control t
DS18B20
- 温度传感器，为德州仪器的DS18B20，程序调试无误，在51单片机上可直接使用-Temperature sensor, for Texas Instruments DS18B20, debugging is correct, the MCU 51 can be used directly on
AD9851
- 51单片机控制ad9851进行扫频，包含初始化和写频率控制字-51 single-chip control ad9851 to sweep, including the initialization and the frequency control word write
Local-oscillation
- 51单片机控制TLC5618产生锯齿波，作为本振的触发信号，并通过写ad9851的频率控制字来产生扫频信号-51 SCM TLC5618 produce sawtooth, as the vibration of the trigger signal, and by writing ad9851 frequency control word to generate sweep signal
DS1302
- 时钟芯片ds1302在单片机上的时序实现，可以方便操作，并且所得值可以在yb12864zb上进行显示-Ds1302 clock chip on the chip timing to achieve, you can easily operate, and the value obtained can be displayed on the yb12864zb
MSP430 F2121 用gpio模拟I2C的代码
- MSP430 F2121 用gpio模拟I2C的代码-Simulate I2C interface with gpio in MSP430 F2121