资源列表
test_demo
- LPC175x M3微处理器PWM模块输出频率调试模板-LPC175x M3 microprocessor debug output frequency PWM module template
Init
- C8051F120 高性能单片机 初始化程序-C8051F120 High-performance microcontroller initialization
The-temperature-alarm-system-
- 由键盘设定上限，下限温度；DS18B20测量温度；并在1602液晶上显示设定温度，测量温度；若测量温度不在设定森度范围里，则蜂鸣器响，进行报警。-From the keyboard to set an upper limit, lower limit temperature DS18B20 measures temperature and in the 1602 LCD display set temperature, temperature measurement if the tem
DS1302-C
- 用DS1302时钟芯片编写的时钟程序。能显示年、星期、月、日、时、分、秒。-DS1302 clock chip with a program written in clock. Can show years, weeks, months, days, hours, minutes, seconds.
STM_ADC
- stm8 ADC源代码，可用，stm8 ADC源代码，可用
nRF905
- NRF905无线模块发送端与接收端的程序，已经调试过，对于NRF905的初学者是个不错的选择。-NRF905 wireless transmitter and receiver modules of the program is debugged, NRF905 for beginners is a good choice.
Lattice_Snake
- 使用8*8点阵在51单片机上实现的贪吃蛇程序，使用独立按键控制方向-8* 8 dot matrix 51 MCU Snake procedures, the use of independent keys control the direction of
W5100-pro
- W5100程序 C语言 可直接使用 少量要修改-W5100 program C
src-V0.1.1-2012-02-041701
- 程序员：钱树勇 采用定时中断检测4*4按键；识别长按短按，按压按键3秒默认为长按模式；具有松手检测功能。采用定时扫描模式，无死循环代码，所以更少占用Cpu资源-Timer interrupt to detect 4* 4 buttons identify long press short press, press the button for 3 seconds by default long press mode let go of detection. Timing scan mode,
smartcar-demo
- 飞思卡尔智能车光电组例程（中间一条黑线）-SmartCar demo
Dont-take-the-word-12864-display
- 不带字库的12864显示 12864驱动-Don t take the word 12864 display
Sources
- 采用DS18B20和STM32F103RBT6编写的测温程序，每秒从USART1输出温度数据。采用3.5版固件库，自编DS18B20库文件，需要注意的是使用本库前需要写delay_us和delay_ms函数。电路上采用8M晶振，PA8为数据口，如有变化请修改stm32f10x_conf.h文件。-The temperature program DS18B20 and STM32F103RBT6-written per second from USART1 output temperature d