资源列表
up51s003
- 此代码为单片机唱歌程序，可以通过程序控制让单片机唱歌-This code for the single-chip microcomputer to sing procedures, can be controlled to allow single-chip microcomputer to sing
uP51s004
- 次代码为LED数码显示程序代码，使LED现出特定的格式 -Time code for the LED digital display program code, so that specific format LED show
up51s005
- 此代码为按键扫描程序，使单片机感知用户的按键，并输出-This code for button scanning process, so that single-chip sensing the user' s keystrokes, and output
1820
- 18b20的控制程序,适合初学者用的,可以修改使用-18b20 the control procedures
CRM
- 旋转体通过传感器发出的转速信号，通过运算，得出旋转体转速。-Rotating body rotation speed sensor signal sent through the calculations, obtained rotating body rotation speed.
llj
- 读取流量传感器信号，进行判别，再进行运算，得到平均流量值。-Read the flow sensor signal, to determine, and then carry out calculations, the average flow value.
foulines_menu
- 在128-64的LCD上实现了四行多级菜单，有详细的注释，方便用户参阅和修改，简单实用。-128-64 at the LCD on implementation of the four lines of many class menu, there is a detailed notes, see and modify user-friendly, simple and practical.
MCT-MYL
- 读取旋转体转速信号，计算转速值，并且设置报警值，同时输出对应电压值。-Read rotating body rotation speed signal, calculating the speed value, and set the alarm value, while the corresponding output voltage.
adt75
- 本程序是12位温度传感器的驱动程序，已经实现了大部分功能，只有几个部分未完成，可在使用时简单修正就课使用，包括： 1.温度值的显示部分，当温度低于1摄氏度而又高于0摄氏度时的显示部分；2.设定温度的上下限值。 另外提供一种功能少但可以实现温度测量的程序，方便移植使用。-This procedure is a temperature sensor 12 drivers, have achieved most of the functions, only the part of some u
MCT-PSIO
- 分别读取两个信号，比较两个信号的时间周期，得出这两个信号的角度差。得出发动机的提前角。-Separately read two signals, comparing two signal cycles, two signals arrive at such a bad angle. Derived engine advance angle.
ad767
- 实现了12位DA转换芯片ad767与C8051F020的接口数据采集和控制，并提供矩阵键盘控制和数码管显示。-Implementation of the DA converter 12 and C8051F020 chip AD767 interface data acquisition and control, and provides control of matrix keyboard and digital display.
the_effect_of_implementation_on_wheels_rolled_from
- 12864液晶趣味显示：实现汽车轮子从右滚到左的效果 -12864 LCD interesting Show: implementation on wheels rolled from right to left the effect of