资源列表
ili9341
- Driver for initialize ADC routines and ILI9341 Display on dspic33 devices
i2c
- I2C测试程序，实现控制板与存储器之间的读写操作，有利于初学者对I2C的了解与学习(I2C test program, to achieve read and write operations between control board and memory, is conducive to beginners' understanding and learning of I2C.)
译码显示
- 一个简单的译码显示器，用于eda实验和电子技术综合实验(A simple Decode display)
CODE_1
- 人体感应模块+stm8s003，检测到人用单片机控制LED灯亮(The human body sensing module +stm8s003 detects that people use single-chip microcomputer to control LED lights)
Curriculum_Design_F
- DA转换，和12864输出。每一位发送间隔在200us左右，包含三种波形sine tri和 squ，留有较多函数可做拓展使用，已通过调试和仿真，课设使用byJ_ksd(DA conversion, and 12864 output. Each sending interval is about 200us, containing three kinds of waveforms sine tri and squ, leaving more functions to expand, and has
自制2.4G频率计
- 基于STM32的频率计设计，，，有需要的试试看看(STM32-based frequency meter design,,,)
KT0923资料
- KT0923收音的驱动程序，包含自动手台，手动搜台，ST等。(KT0923 audio driver)
蓝桥板子
- 实现了温度传感器的编程和高温示警，主要基于大学生电子设计竞赛板子(Realization of temperature sensor programming and high temperature warning)
4X4矩阵键盘检测程序
- 基于stm32的4X4键盘矩阵检测程序，直接编译可以使用，简单高效，检测准确，可以直接在不同平台快速修改使用。(Based on the stm32 4X4 keyboard matrix detection program, direct compilation can be used, simple and efficient, accurate detection, and can be quickly modified and used on different platforms.)
光敏自动调光程序
- 光敏电阻自动调光程序，可用于光控开关，路灯等(Photosensitive resistor automatic dimming procedures, can be used for light control switches, street lamps, etc.)
24C02读写练习(汇编)
- 24C02读写练习(汇编),自己写的不好，多见谅(24C02read/word,Reading and writing is)
i2c_EEPROM_AT24C64
- II2的时序设计，根据给出的仿真模型，验证得到的II2的正确性(The timing design of II2 is based on the simulation model given to verify the correctness of the II2 obtained.)