资源列表
Interworking-FOR-lpc21xx
- ADS1.2中的工程模板，适合ARM/THUMB联合编程的，LPC21XX通用。测试后OK-ADS1.2 in the project template for ARM/THUMB joint programming, LPC21XX common. Test OK
PwmDac
- PWM用于DAC的测试程序，短小精悍。已经在EASYARM2100开发板上测试通过-PWM test program for the DAC, short and pithy. Development board has been tested in EASYARM2100
SpiDisp
- LPC ARM 21XX的SPI口用于驱动七段码，ARM为主机，七段码为从机，对于快速了解SPI，有一定帮助-LPC ARM 21XX SPI port is used to drive seven-segment, ARM for the host, seven segment from the machine for quick understanding of SPI, will definitely help
EINT01
- PROTEUS下对LPC ARM7 的LPC2106进行仿真，这个是针对外部中断的。测试通过！-PROTEUS under the LPC2106 LPC ARM7 simulation, this is for an external interrupt. Test!
1sTime
- proteus在对LPC ARM 的定时器进行1S仿真，测试通过-proteus in 1S timer with LPC ARM simulation test
ADS7843
- 触摸屏模数转换芯片的驱动 能将电阻式触摸屏的位置转换成数字量-Touch-screen analog-digital conversion chip can drive resistive touch screen position into digital
TFT3.5
- ILI9481DS_V0.26 arm7 lpc2134
12
- ARM嵌入式常用模块与综合系统设计实例精讲》练习题与答案.rar-ARM Embedded commonly used modules and integrated system design example Jing Jiang " exercises and answers. Rar
STM32-TIM1-PWM
- 通过对 TIM1 定时器进行控制，使之各通道输出插入死区的互补PWM 输出， 各通道输出频率均为17.57KHz。 其中，通道1 输出的占空比为50 ，通道2 输出的占空比为25 ，通道3 输 出的占空比为12.5 。各通道互补输出为反相输出。 TIM1 定时器的通道1 到3 的输出分别对应PA.08、PA.09、PA.10 引脚，而通 道1 到3 的互补输出分别对应PB.13、PB.14 和PB.15 引脚，将这些引脚分别接 入示波器正接线，GND 引脚接示波器负接线，
suspend
- 51单片机的所有中断，基于STC89c51单片机的开发，包含所有中断程序。-All 51 microcontroller interrupt
tq2440
- 使用Keil uVision4开发的基于TQ2440开发板的花式流水灯源码-An LED program developed using Keil uVision based on TQ2440.
AN10583_1
- 介绍MP3芯片，属于资料。包括MP3, player, codec, decoder MP3, Layer I, Layer II, Layer III, libmad, MAD, EFSL, Embedded File System Library, MMC, card, SD card-This document describes how to design an MP3 player using the LPC2148