资源列表
NXPARMsolutions20100524v2
- NXP ARM系列芯片最新选型手册，20100524-NXP ARM chips the latest selection of manual, 20100524
CPU_J-Tag_pinouts
- CPU J-Tag pinouts (Top View): SiRFprima_pinout.png SiRFatlasIV_pinout.png SiRFatlasIII_pinout.png Samsung_S3C2440A_Pinout.png Samsung_S3C2416X_Pinout.png
small_alarm_clock
- 自己编写的一个模拟小闹钟功能的程序，非常好玩。-I have written a small alarm clock features an analog process, very fun.
LM75
- STM32F10E开发板I2C总线读取温度传感器-STM32F10E read the value of temperate sensor through I2C BUS
led
- 在ARM2440的嵌入式的linux驱动程序，本程序是用来驱动LED的，包含其应用程序。-Embedded in the ARM2440 linux driver, this procedure is used to drive LED' s, including their applications.
CF
- LPC3250上CF卡驱动，ADS工程，测试通过。-LPC3250 on the CF card driver, ADS project, the test.
SDCard
- SD卡驱动程序，在NXPlpc3250上测试通过，ADS工程。-SD card driver, in testing by NXPlpc3250, ADS project.
vehicletrackingsystem
- Vehicle Tracking System Using LPC2129
LM3S_HIB_PinWake
- ARM CORTEX M3DSFDSG DSG-ARM CORTEX M3
2812
- 2812寄存器速查，集合了2812芯片的所有寄存器，在编程的时候可以快速查阅-Handbook for 2812 register, the 2812 chip set all registers, in the quick access when programming
PICF18_TC77
- PIC18和TC77 溫度感測器的範例程式, 透過spi傳輸。-PIC18&TC77 source code of temperature sensor
S3C2410-init
- 基于ARM9芯片S3C2410异常中断程序设计。验证的代码详细分析了基于ARM嵌入式系统的异常处理流程。然后阐明关键字“-irq”的作用，设计出中断处理函数。最后，通过设置中断控制寄存器，设计外部中断EINT3的初始化程序，并给出主程序流程图。实践证明程序运行稳定可靠。-S3C2410 ARM9-based chip exception interrupt programming. Detailed analysis of the code verification of embedded sy