资源列表
fifo
- 用FPGA做的fifo，源码，调试通过，有工程和波形文件-FPGA to do with the fifo, source code, debugging through, there are engineering and waveform file
IEEE_JTAG_Atmel_ATF1502BE
- The ATF1502BE device is an In-System Programming (ISP) device. It uses the industry-standard 4-pin JTAG interface (IEEE Std. 1149.1), and is fully compliant with JTAG’s Boundary-scan Descr iption Language (BSDL).
ARM9GPRS
- 基于ARM9的嵌入式GPRS的设计与实现,用基于ARM核的S3C2410微处理器-ARM9-based embedded GPRS design and implementation, with ARM core-based microprocessor S3C2410
shumatoyingyi
- 数字投影仪，ARM下的例程，参考下希望对大家有帮助-Digital projectors, ARM under the routine, refer to the following people want to help
2440myled
- s3c2440上led驱动试验 很经典的 稍作改动就可以借用了-s3c2440 on the classic experiment led drive to make a minor can be borrowed! !
arm300
- 周立功LPC2200开发板启动代码分析，对初学者应用该开发板会遇到的问题进行了总结-ZLG LPC2200 development board boot code analysis and application of the development board for beginners encounter problems are summarized
USART
- stm32非固件库程序,通过串口4发送数据，传统ARM写法-smt32 usart
ADC
- STM32非固件库程序，ADC双模式，通过串口发送-STM32 firmware library procedures for non-, ADC dual-mode, through the serial port to send
ADC3
- STM32非固件库程序，实现功能：ADC3-Non-STM32 firmware library program, to achieve functional: ADC3
ADC_dam_9
- STM32非固件库，实现功能：ADC通过DMA传输-Non-STM32 firmware library, implementation features: ADC through the DMA transfer
GPIO_B11
- STM32非固件库程序，实现功能：GPIO口输出方波-Non-STM32 firmware library program, to achieve functional: GPIO port output pulse
2009916211154921DT_IRxample
- s3c44b0外部中断测试程序实现对外部中断INT3和INT4的中断响应,在SDT2.5环境下调试通过。-s3c44b0 external interrupt test program to realize the external interrupts INT3 and INT4 interrupt response, in the SDT2.5 debugging environment through.