资源列表
C51FM1602
- 1602液晶驱动程序C51程序-FM1602液晶底层驱动程序-1602LCD drive code
NEW_DNW(OK)
- 新移植的DNW，可以从NandFlash直接启动。-New transplant DNW, can directly activate the NANDFLASH.
2410BootLoader
- s3c2410引导程序，自动判断由NorFlash，NandFlash还是调试 启动方式，然后自我复制，运行。-S3C2410 boot automatically judged by the NorFlash, NandFlash start-up mode or debug, then the self-replication, run.
Led.tar
- Program to blink the led for AT91RM9200-EK board.
arm_my
- 嵌入式开发板使用ARM9对一些IO口操作，USB,NANDFLASH的开发，以及串口USB等源码-ARM9 embedded development board using the mouth for some IO operation, USB, NANDFLASH development, as well as USB and other serial source
FAT16test
- 关于嵌入式构建FAT16的源码，在开发板S3C2440开发-About Embedded FAT16 to build the source, at S3C2440 development board to develop
WINCE
- 开发板TE2440关于wince下的操作，包括配置，以及开发环境的介绍-Development board TE2440 about wince under the operation, including configuration, as well as the development environment of the introduction
u241mon
- s3c2410启动程序，使用与三星出的基于arm9的开发板-S3C2410 start procedures
NANDFLASH_S3C2440A
- 基于S3C2440A的大容量NAND+FLASH的设计应用-The design of large-capacityapplications NANDFLASH based on S3C2440A !
S3C2440_SM501
- 基于S3C2440和SM501的嵌入式系统硬件设计-Based on S3C2440 and SM501 embedded system hardware design. Pdf
PROJEKTARM
- LPC2103 - project (using UART, 1wire, interrupts)-LPC2103- project (using UART, 1wire, interrupts)
projekt1
- LPC2103 Project - temp measure-LPC2103 Project- temp measure