- ADCcalibrationV11 This example program runs from RAM on the EzDSP. It initializes the event manager to generate a periodic start of conversion (SOC) pulse to the ADC. This will trigger a conversion of the ADC and when completed the ADC will generate an interrupt. The interrupt is serviced and the ADC calibration function is called. This function will read two user selected reference channels and calculate the appropriate calibration gain and offset and then calibrate all other user channels.
- gnuradio-0.9.tar software defined radio
- yinyue-generate 用51单片机产生音乐的汇编程序
- CodeSoftServer 一个使用CodeSoft类
- testssl.sh-2.9dev testSSL source code included
- F1舵机控制程序 利用STM32F1单片机控制舵机精确转动
资源列表
fifo
- 一个简单的FIFO实现，基于STM32的UART+DMA方式。(A simple FIFO implementation, based on the STM32 UART+DMA approach.)
nrf51-vl53l0x-driver-master
- vl53l0x nrf51平台驱动，修改后可移植大部分单片机平台(vl53l0x nrf51 driver)
松翰C语言(项目)例程
- 松翰sn8p2602b的一个例程。可以参考学习学习(A routine Sonix sn8p2602b. You can learn by reference)
APP
- STM32 IAP 电量计源码i2c ,完整的TI bq34z100电量计使用源码(STM32 IAP Electric meter)
步进电机驱动
- 使用STM32F103系列单片机，简便的步进电机驱动代码(Simple stepper motor driver code)
7.协调器+继电器
- 协调器收集终端节点数据并通过串口上传，同时可接收串口命令打开或关闭继电器。(The coordinator collects the terminal node data and uploads it through the serial port, and also receives the serial command to turn on or off the relay.)
03-多路ADC转换-模拟串口发送
- 在stc51单片机上实现对多路ADC、串口的控制例程(Stc51 MCU in the realization of multi-channel ADC, serial control routines)
电弧的检测
- 硬件图纸全套，AD所化，keil编程基于51系列的单片实现电弧的检测。(Complete hardware drawings, AD, Keil programming, based on the 51 series of single chip arc detection)
STC15系列只用一个定时器的红外接收程序
- 用一个定时器完美的解码NEC红外编码数据，(Decode NEC infrared encoding with a timer)
proteus 新增元件库下载
- proteus最新元件库下载，增加元件库种类(Proteus latest component library download, add component library type)
stm32例程
- stm32，SPI—读写串行FLASH（W25Q128），串行FLASH文件系统FatFs，FatFs文件系统常用函数测试(STM32, SPI - read and write serial FLASH (W25Q128), serial FLASH file system, FatFs, FatFs file system, commonly used function test)
转速测量
- 上位机界面开发、发动机转速测量、数据监测(Host computer interface development)