资源列表
ILI9341_BOE2.4
- 有关TFT液晶驱动ILI9341的驱动例程，可移植于任何单片机和ARM系统。-For TFT LCD driver ILI9341 driver routines can be ported to any microcontroller and ARM systems.
STC12C5620AD_ID_CARD_READ
- 基于125khz id卡的读卡c程序manchester编码方式：0为10 1为01，如果与其相反则需要做相应的修改。 适用于125KHz非接触式ID卡，EM4100兼容格式ID卡(64bits, Manchester编码) MCU：stc12c54xx crystal:11.0592M-A 125KHZ ID CARD READ C PROGRAM
RS485
- 单片机上电后向串口数据0XAA，接收到数据后，然后向串口发送接收到的数据使初学者领略使用中断进行数据通信，传输方式为RS485-Power single-chip serial data to the 0XAA, receive data, and then sent to the serial data received interrupt beginners enjoy the use of data communications, transmission for RS485
alarmvoice
- pic单片机控制蜂鸣器发出警报声，用c语言写的，proteus仿真通过-pic microprocessor controlled alarm buzzer sound, written with the c language, proteus simulation by
mimashuo
- 89C52单片机实现密码锁的功能。里面附有原理图和源代码-89C52 MCU lock function. Inside with a schematic and source code
AD0809-C-chengxu
- AD590成功C程序加protues图，希望对大家有用-AD590 successfully added protues Figure C program
RS485_COM
- 单片C语言程序，对RS485的通信操作例程，已经调试通过，可直接移植使用。-Monolithic C language program, the RS485 communication operation routines have been debugging through, can be transplanted directly to use.
light
- C51 编写的通过按键调节led灯亮度的程序,用定时器产生可调PWM.-C51 prepared through the buttons adjust brightness led procedures, have an adjustable timer with PWM.
LM6029datasheet
- 这是LM6029液晶显示的源程序和资料，程序调试过，可以用。-This is datasheet and C source of LCD LM6029,it can be used correctlly.
web51
- 用于51单片机开发网络通信的源代码，可用PC连接访问。-Development for 51 single-chip network traffic' s source code can be used to connect PC to access.
infones
- info nes ，可以移植到各个单片机上。 适合单片机的移植。 这个是 PC 上的。 C 语言编写-info nes, can be transferred to each microcontroller. Microcontroller for transplantation. This is the PC on. C language
ht1622
- 段码驱动芯片HT1622在MSP430下的驱动程序已调试通过！-Segment driver IC HT1622 driver the MSP430 has been under commissioning by!