资源列表
dm3xx_sd_boot-6.1
- dm365 dm355 boot from SD and flashing software
gfd
- 步进电机速度及转速控制利用8255及8253控制电路-Stepper motor speed and speed control circuit using 8255 and 8253 control
FreeRTOSDemo
- This is LCP2368 freertos demo with DP83848 phy
ATMEGA48-huanseqi
- 舞台换色器的控制程序。包括DMX512信号接收，光栅检测位移、控制直流电机加速、减速等功能。-The stage for color control program. Including DMX512 signal receiving, grating displacement detection, control of DC motor acceleration, deceleration and other functions.
hpi
- arm9芯片s3c2410与dsp6713芯片的hpi*互程序，主要实现对dsp的初始化及dsp与arm之间的数据通信-s3c2410 arm9 chip chip hpi mouth with dsp6713 interactive program, the main achievement of the dsp and dsp initialization and data communication between the arm
temperature-PID-controller-
- 基于STM32的温度控制器系统设计，带液晶显示，带死区控制，在实验室实验，效果较好。-temperature controller
STM32-ADC
- 基于STM32-cortex3 开发板应用实例工程文件-模数转换实验-Development board based STM32-cortex3 Applications project files- analog-digital conversion experiments
Project_7
- MC9S12单片机SCI模块中断检测，串口数据传输检测-Single-chip module interrupt detection MC9S12 SCI, serial data transmission test
LinIEbusTest_A3
- LIN 总线测试代码，LIN总线的硬件用1020，软件用上面的代码就可以了。-LIN bus test code, LIN bus with the 1020 hardware, software, use the above code on it.
UARTO
- C8051f310串口通信示例程序，采用串口usart1,串口引脚为P0.4和P0.5，波特率115200. 在KEIL下调试通过。-C8051f310 example of serial communication program. Use usrat1, P0.4 and P0.5 on P0 for TX and RX. The BARDRATE is 115200.
RTC(time)
- LPC1768的RTC的时间读取和设置程序-LPC1768 the RTC time to read and setup
LPC1768_WDT(watchdog)
- LPC1768单片机看门狗的设置和使用程序，基于keil4-LPC1768 microcontrollers watchdog set up and use the program, based keil4