资源列表
uCOS_S3C44B0_code_1.0
- uc/OS在S344B0上的移植代码,就不多说了,一份很好的学习和研究资料.-uc/OS in the transplant S344B0 code, not more than that, a good learning experience and research data.
paomadeng
- 实现C51单片机跑马灯程序，已经编译调试成功-Marquee C51 single-chip process to achieve
DA
- 程序产生锯齿波,DAC输出更新发生在写DAC0H时.-Sawtooth procedures, DAC output updates occur in writing when DAC0H.
8bitpwm
- 参考程序B:WPCA1pwm8.C 程序实现PCA模块0和1的8位PWM输出Ｊ涑鼋臗EX0配置在P0.0脚输出方波占空比为2/3
ADtextcputemptuture
- 参考程序B.WADC0.c程序模/数转化通道AIN0.0的输入值-B.WADC0.c procedure reference procedures for A/D conversion value of channel input AIN0.0
AD8bitswitch
- 参考程序B.WADC1.c程序模/数转化通道AIN1.0的输入值-B.WADC1.c procedure reference procedures for A/D conversion value of channel input AIN1.0
intteruotint0
- 时钟失效监测器，选择外部时钟源作为系统时钟-Clock failure monitor, select external clock as system clock source
7.1_GPIO_test
- 此工程里面的程序是ST公司的STM32芯片的跑灯实验，里面还涉及到案件以及中断处理等等。对学习STM32需要做中断，按键，或者控制LED的人来说很不错。已经在real view MDK 3.24下编译通过。-Procedures inside the project is ST' s STM32 chip experiment running lights, which also involves the case, as well as interrupt handling and so
example
- 凌阳SPCE061A的例子程序，有LCD。声音。模组。LED.等-Sunplus SPCE061A example of the procedure, there are LCD. Voice. Module. LED. Etc.
DelphiLanguageGuide
- This document is like a guide for students programming with delphi.
AT24C08_Controller
- AT24C08 is a memory controller for SPI 8Mb memory
TS8001K
- 3.2寸ｔｆｔ－ＬＣＤ资料。驱动ｉｃ是ILI9320。-3.2-inch tft-LCD information. Driver ic is ILI9320.