资源列表
dac
- 关于28335的例程，da转换，参考一下-routine of 28335，dac
UltrasonicWave
- 贡献一个用STM32开发的超声波测距程序，经过自己测试，可以测量8CM到5M的距离范围-Contribution to the development of an ultrasonic distance measurement with the STM32 procedure, after their tests can measure the distance range 8CM to 5M
LCD12864_4
- arm7的人机界面程序，显示液晶用的是12864，上传给大家共同学习-arm7 the man-machine interface procedure is used in LCD 12864, upload for everyone to learn together
s3c2410-can-mcp2510
- 基于ARM,S3C2410的can总线应用程序，可实现can总线收发功能。-Based on the ARM, S3C2410 application of the can bus, can be achieved can bus transceiver function.
20091014142824.
- w5300操作代码 w5300操作代码-w5300 code
20090419wnl
- 不怕掉电的万年历,用了两个专用芯片8155及DS12887,-Power-down is not afraid of the calendar, with two dedicated chips 8155 and DS12887,
OCM12232-5
- 12232 LCD驱动程序2，12232 LCD驱动程序2-12232 LCD driver 2,12232 LCD Driver 2
icl7135
- 最全的ICL7135资料，你想要的资料都包括，keil51源码，可直接下载单片机使用。本程序已经实验通过。-Most all of the ICL7135 data, the information you want to include, keil51 source, can directly download the MCU to use. The experimental procedure has been adopted.
id_door
- 用51单片机做的ID卡门禁系统，带12864液晶显示，通过触发继电器来控制门禁。附带原理图和PCB板。-Done with 51 single-chip ID card access control systems, liquid crystal display with 12864 through the trigger relays to control access. Attached schematic and PCB board.
FIFO64
- FIFO级联，利用verilog语言实现Xilinx FIFO18单元的多个级联，增大FIFO深度。-FIFO cascade, using Verilog Xilinx FIFO18 language to achieve a number of cascade units, increasing the FIFO depth.
TFT_and_Touch
- 320*240TFT液晶屏和触摸屏驱动（UH7843）-320* 240TFT LCD screen and touch screen driver (UH7843)
LPC1114开发板例程
- LPC1114的最小系统，即时钟配置和时钟输出