资源列表
C6000-3
- C语言实现设计的FIR滤波器,带通提取该频率信号，带阻是限制该频率信号。采样频率22050Hz，自己确定通带宽度，一般信号通带（或阻带）在200～300Hz，通带内衰减1db，过渡带在100～250Hz，阻带内衰减30db。-C language design FIR filter,Bandpass frequency signal extracted with resistance is to limit the frequency of the signal. Sampling freque
C-FIR
- 带通提取该频率信号，带阻是限制该频率信号。采样频率22050Hz，自己确定通带宽度，一般信号通带（或阻带）在200～300Hz，通带内衰减1db，过渡带在100～250Hz，阻带内衰减30db。-Bandpass frequency signal extracted with resistance is to limit the frequency of the signal. Sampling frequency 22050Hz, itself the passband width, gene
FFT
- 该工程在CCS软件下编写，用DSP通过C语言实现FFT算法，并能够对输入信号进行频谱分析-The project in the CCS software is written using DSP to achieve FFT algorithm C language, and be able to input signal spectral analysis
FIR-demo
- 该工程实现了FIR滤波器的DSP设计，并且在工程中对该滤波器的性能进行了验证。该工程在CCS软件下运行。-The project achieved DSP design FIR filter, and the filter performance was verified in the project. The project is run under the CCS software.
Bootloader
- 此文件用于如何烧写CPU板的Bootloader，内含dat文件转换工具、烧写Flash的CCS程序、烧写说明文档等-This file is used to program how the CPU board Bootloader, containing dat file conversion tool, Flash programmer CCS program, programming documentation, etc.
dip
- DSP28335例程，帮助理解开发环境及使用方法-demo for TMS320C28335
adc_dma
- DSP28335例程，帮助学习开发板及开发环境-demo for TMS320C28335
DSP-init
- DSP28335核心板的驱动程序和库文件-Drivers and libraries DSP28335 core board
lab1-GPIO_output_LED
- 用DSP28335进行编程，实现LED等的闪亮操作，适合初学DSP的人员及实验板开发。-With DSP28335 programming, realize LED flashes and other operations, suitable for beginners DSP personnel and experimental board development.
lab3-timer0_LED
- 用DSP28335进行编程，实现LED等的闪亮操作，适合初学DSP的人员及实验板开发。-With DSP28335 programming, realize LED flashes and other operations, suitable for beginners DSP personnel and experimental board development.
lab2-GPIO_input_button
- 用DSP进行GPIO的编程，采用的工具是28335，实现的是output的功能-With the DSP GPIO programming tool uses 28335, to achieve the output function
lab4-timer1_LED
- 用DSP进行LED的编程，采用的工具是28335，实现的是LED定时的功能-LED with the DSP programming tool uses a 28335 to achieve the LED timing function