资源列表
DSPSci
- DSPTMS320F2812串口通信程序，让初学者了解DSP串口工作原理-DSP2812 serial communication program
modbus
- 代码实现了MODbus的响应功能，可与触摸屏进行数据通信。-The code finishs MODBUS protocol，and can communicate with touchscreen 。
MOTOR
- PWM波控制电机的转动程序 DSP的PWM1和PWM2来进行控制 经过了两级放大输出 改变电机转速或转向 -PWM wave control the motor rotation program the DSP PWM1 and PWM2 control after two amplified output to change the motor speed or steering
STEP
- DSP控制步进电机原理 由DSP输出的PWM3~6做为步进电机的4个信号线输入,选了PWM的IO口.-DSP controlled stepper motor principle by the DSP output for PWM3 ~~ four signal line input as a stepper motor, select the IO port of the PWM.
MCBSP
- DSP的MCBSP的应用.插上PHONE和MIC,我在通过play_mode来改变我们是要的录音还是放音-DSP' s MCBSP. Plug PHONE, MIC, I by play_mode to change to the recording or playback
LED
- DSP的SPI工作原理DSP，CPLD，74HC595（串入并出的移位器），共阳数码管。SPIMOSI和 SPICLK直接从DSPJIE接到了74HC595的SER和SRCLK，作为数据和时钟信 号的输入，SPICS由CPLD引出来控制74HC595的选通。-DSP SPI works DSP, the CPLD, 74HC595 (string in and out of the shifter), Yang digital tube. The SPICLK SPIMOSI and d
LED-1602
- 1602字符液晶的使用 数据线和12864共用在一起的,都是从CPLD引出来的,控制信号RS和E两个信号线全部都是由CPLD引出的.因此在CPLD中将会定义一他们各自的地址-1602 character the use of the LCD data lines and 12864 shared together, from the CPLD leads to the control signal RS and E the two signal lines are all the leads f
LCD-12864
- FYD12864液晶在DSP中的使用 又两个重要的控制信号,在这里说明下,是由DSP引出的T3CTRIP和T4CTRIP,分别是做为数据命令切换信号和使能控制信号-Two important FYD12864 LCD used in DSP control signal, described here by the DSP leads T3CTRIP, and T4CTRIP respectively switching signal as a data command and enable c
lab26-PWM_TIMER_INT
- 描述了PWM的定时器中断 各种寄存器的配置-descr ipt pwm timer interrupt ，tell us all kinds of registers how to use
fir_ti
- ti5400系列的FIR代码， -, ti5400 series, FIR code, a ti5400 series of FIR code
6437video_osd_bios_sobel
- TI DM6437EVM上的视频实验，加上了Sobel算法。-The experiment the TI DM6437EVM video, coupled with the Sobel algorithm.
SRIO_LoopbackTestProject
- 6678EVM上的SRIO look back测试代码，6678EVM上的SRIO look back测试代码-The SRIO look back on 6678EVM test code 6678EVM on SRIO look back test code